相关论文: Phase formation in CrFeCoNi nitride thin films

Pd$_{1-x}$Ni$_x$ alloy system is an established ideal transition metal system possessing a composition induced paramagnetic to ferromagnetic quantum phase transition (QPT) at the critical concentration $x_c \sim$ 0.026 in bulk. A…

This work reports on the synthesis of chromium (III, IV) oxides films by KrF laser-assisted CVD. Films were deposited onto sapphire substrates at room temperature by photodissociation of Cr(CO)6 in dynamic atmospheres containing oxygen and…

The CoCrFeNi alloy is widely accepted as an exemplary stable base for high entropy alloys (HEAs). Although various investigations prove it to be stable solid solution, its phase stability is still suspicious. Here, we identified that the…

In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as…

We investigate the growth of the recently demonstrated composite material composed of vertically aligned carbon nanotubes capped by few graphene layers. We show that the carbon nanotubes grow epitaxially under the few graphene layers. By…

A combination of experiments and numerical modeling was used to study the spatial evolution of the ferromagnetic phase transition in a thin film engineered to have a smooth gradient in exchange strength. Mean-field simulations predict, and…

We studied the growth behavior, structural, electronic, and magnetic properties of cobalt nitride (Co-N) thin films deposited using direct current (dc) and high power impulse magnetron sputtering (HiPIMS) processes. The N$_2$ partial gas…

Neutron powder diffraction studies of the crystal and magnetic structures of the magnetocaloric compound Mn1.1Fe0.9(P0.8Ge0.2) have been carried out as a function of temperature, applied magnetic field, and pressure. The data reveal that…

The tendency for nitrogen deficiency in cubic Cr-Mo-N and Cr-W-N solid solutions is predicted by a comprehensive evaluation of the lattice spacing, mixing thermodynamics, and elastic properties using first-principles calculations and…

Poly- and single-crystal thin films of U-Mo alloys have been grown both on glass and sapphire substrates by UHV magnetron sputtering. X-ray and Electron Backscatter Diffraction data indicate that for single-crystal U1-xMox alloys, the pure…

Titanium (Ti), due to its excellent properties, is widely exploited in thin film technology that usually leads to the production of {\alpha}-phase (hcp) Ti films. In this work, we investigate the phase evolution of Ti films deposited by…

Lowering the operating temperature of Solid Oxide Fuel Cells (SOFCs) is essential for improving durability and enabling large scale commercialization. Mixed ionic-electronic conductors (MIECs) of the Ruddlesden-Popper family, such as…

Electrocatalysts for the oxygen reduction reaction (ORR) based on complexes of iron and nitrogen in a carbon matrix (Fe-N-C) are a promising alternative to platinum group metal (PGM) based catalysts in polymer electrolyte membrane (PEM)…

The structural and electrical properties of Ti-N films deposited by reactive sputtering depend on their growth parameters, in particular the Ar:N2 gas ratio. We show that the nitrogen percentage changes the crystallographic phase of the…

Layered nanolaminate ternary carbides, nitrides and carbonitrides with general formula Mn+1AXn or MAX (n = 1, 2, or 3, M is an early transition metal, A is mostly group 13 or 14 element, and X is C and/or N) has revolutionized the world of…

Raman studies of nanocomposite SiCN thin film by sputtering showed that with an increase of substrate temperature from room temperature to 500oC, a transition from mostly sp2 graphitic phase to sp3 carbon took place which was observed from…

The behavior as a function of temperature of very thin films (10 to 200 nm) of pentylcyanobiphenyl (5CB) on silicon substrates is reported. In the vicinity of the nematic/isotropic transition we observe a coexistence of two regions of…

Using fluorite oxides as an example, this study broadens high-entropy ceramics (HECs) to compositionally-complex ceramics (CCCs) or multi-principal cation ceramics (MPCCs) to include medium-entropy and/or non-equimolar compositions. Nine…

Ferromagnetic properties of In1-xMnxAs thin films were investigated. Room temperature ferromagnetic order was observed in nominally single-phase films with x = 0.01-0.10. Magnetization measurements indicated that these In1-xMnxAs samples…

We report on the structural and magnetic properties of thin Ge(1-x)Mn(x)films grown by molecular beam epitaxy (MBE) on Ge(001) substrates at temperatures (Tg) ranging from 80deg C to 200deg C, with average Mn contents between 1 % and 11 %.…