相关论文: A Bimodal Hydrostatic Actuator for Robotic Legs wi…
Wearable robots are limited by their actuators performances because they must bear the weight of their own power system and energy source. This paper explores the idea of leveraging hybrid modes to meet multiple operating points with a…
Wearable and legged robot designers face multiple challenges when choosing actuation. Traditional fully actuated designs using electric motors are multifunctional but oversized and inefficient for bearing conservative loads and for being…
This paper present a novel dual-speed actuator adapted to robotics. In many applications, robots have to bear large loads while moving slowly and also have to move quickly through the air with almost no load. This lead to conflicting…
Robots need lightweight legs for agile locomotion, and intrinsic series elastic compliance has proven to be a major ingredient for energy-efficient locomotion and robust locomotion control. Animals' anatomy and locomotion capabilities…
This paper describes the control, and evaluation of a new human-scaled biped robot with liquid cooled viscoelastic actuators (VLCA). Based on the lessons learned from previous work from our team on VLCA [1], we present a new system design…
In the quest for electrically-driven soft actuators, the focus has shifted away from liquid-gas phase transition, commonly associated with reduced strain rates and actuation delays, in favour of electrostatic and other electrothermal…
In biomechanics and robotics, elasticity plays a crucial role in enhancing locomotion efficiency and stability. Traditional approaches in legged robots often employ series elastic actuators (SEA) with discrete rigid components, which, while…
As a single-track mobile platform, bikebot (i.e., bicycle-based robot) has attractive navigation capability to pass through narrow, off-road terrain with high-speed and high-energy efficiency. However, running crossing step-like obstacles…
Highly articulated organisms serve as blueprints for incredibly dexterous mechanisms, but building similarly capable robotic counterparts has been hindered by the difficulties of developing electromechanical actuators with both the high…
Among small-scale mobile robots, multi-modal locomotion can help compensate for limited actuator capabilities. However, supporting multiple locomotion modes or gaits in small terrestrial robots typically requires complex designs with low…
Precise and high-fidelity force control is critical for new generations of robots that interact with humans and unknown environments. Mobile robots, such as wearable devices and legged robots, must also be lightweight to accomplish their…
Robotic systems driven by conventional motors often suffer from challenges such as large mass, complex control algorithms, and the need for additional braking mechanisms, which limit their applications in lightweight and compact robotic…
A hopping leg, no matter in legged animals or humans, usually behaves like a spring during the periodic hopping. Hopping like a spring is efficient and without the requirement of complicated control algorithms. Position and force control…
Hybrid track/wheel-legged robots combine the advantages of wheel-based and leg-based locomotion, granting adaptability across varied terrains through efficient transitions between rolling and walking modes. However, automating these…
Faced with complex and unstructured construction environments, wheeled and tracked robots exhibit significant limitations in terrain adaptability and flexibility, making it difficult to meet the requirements of autonomous operation.…
The heavy-load legged robot has strong load carrying capacity and can adapt to various unstructured terrains. But the large weight results in higher requirements for motion stability and environmental perception ability. In order to utilize…
This paper presents a robotic system where the gear-ratio of an actuator is dynamically changed to either leverage or attenuate the natural load dynamics. Based on this principle, lightweight robotic systems can be made fast and strong;…
While quadruped robots usually have good stability and load capacity, bipedal robots offer a higher level of flexibility / adaptability to different tasks and environments. A multi-modal legged robot can take the best of both worlds. In…
This study proposes a novel robotic hand that can achieve self-adaptive grasping and a large payload (over 20 kg) with a single actuator. Accordingly, two novel mechanisms, an actuation system with self-motion switching and a self-adaptive…
Animals use limbs for both locomotion and manipulation. We aim to equip quadruped robots with similar versatility. This work introduces a system that enables quadruped robots to interact with objects using their legs, inspired by…