相关论文: Imaging Scatterometer for Observing In-Situ Change…
Air annealing generally reduces absorption, scattering, and mechanical loss in amorphous coatings up to temperatures where damage occurs. Our instrument uses an industrial oven with viewports to observe coating scatter and damage during…
Optical coatings formed from amorphous oxide thin films have many applications in precision measurements. The Advanced Laser Interferometer Gravitational-Wave Observatory (LIGO) and Advanced Virgo use coatings of SiO$_2$ (silica) and…
Light scattered by amorphous thin-film optical coatings limits the sensitivity of interferometric gravitational-wave detectors. We describe an imaging scatterometer to assess the role that crystal growth during annealing plays in this…
High reflective coatings are used in many physics experiments. Despite the high quality of the opticalcoating, the performances of the mirrors is altered by the scattered light induced by micrometers sizedefects in the coating layers. The…
We present the results of mechanical characterizations of many different high-quality optical coatings made of ion-beam-sputtered titania-doped tantala and silica, developed originally for interferometric gravitational-wave detectors. Our…
Titania doped with tantala is the high index material (high n) for the optical coatings used in LIGO and Virgo and its thermal noise limits LIGO/Virgo observations of astrophysical sources. In this paper, we study temperature induced…
We investigate the influence of oxygen annealing on the room temperature optical and scintillation properties of CaWO$_4$ single crystals that are being produced for direct Dark Matter search experiments. The applied annealing procedure…
Further development of nuclear power plant technology relies heavily on materials durability under operating conditions. Estimating the materials performance in the operando tests is crucial. In this paper, the mechanical behavior of thin…
We observed and studied strong reduction of optical reflection from the surface of InP wafers after high-temperature annealing. The effect is observed over a wide range of the incident wavelengths, and in the transparency band of the…
Amorphous tantala (a-Ta2O5) is an important technological material that has wide ranging applications in electronics, optics and the biomedical industry. It is used as the high refractive index layers in the multi-layer dielectric mirror…
The practical strength of oxide glasses is greatly reduced by surface flaws that form during processing and use. Instrumented indentation can mimic such real-life damage events and induce flaws and cracking under controlled conditions. At…
We report on the development and extensive characterization of co-sputtered tantala-zirconia thin films, with the goal to decrease coating Brownian noise in present and future gravitational-wave detectors. We tested a variety of sputtering…
This work describes the elaboration of rutile titanium dioxide films with high refractive indices and low scattering by sol-gel process and controlled crystallization. The evolutions of the optical properties and crystalline structure of…
The annealing treatment in the advanced manufacturing process, e.g., laser-assisted manufacturing, determines the final state of glasses which is critical to its thermal, electrical and mechanical properties. Energy barriers analysis based…
A new method of probing mechanical losses and comparing the corresponding deposition processes of metallic and dielectric coatings in 1-100 MHz frequency range and cryogenic temperatures is presented. The method is based on the use of…
Amorphous mixed titania-tantala coatings are key components of Bragg reflectors in the gravitational wave detectors (GWDs). Attaining the lowest possible values of optical absorption and mechanical losses in the coatings is of paramount…
This article identifies the process of crystallization of thin high-$\kappa$ dielectric films and an optimal range of annealing temperature in the field of high-$\kappa$ dielectric-based metal-oxide-semiconductor (MOS) technology for its…
Solid-state dewetting phenomenon in silver thin films offers a straightforward method to obtain structures having controlled shape or size -this latter in principle spanning several orders of magnitudes -- with potentially strong interest…
We present results from the SPring-8 Angstrom Compact free electron LAser (SACLA) XFEL facility, using a high intensity ($\sim\!10^{20}\,$W/cm$^2$) X-ray pump X-ray probe scheme to observe changes in the ionic structure of silicon induced…
Indium-tin oxide (ITO) is a crucial functional layer for the optoelectronic applications, such as non-volatile color display thin films based on the ITO/phase-change material (PCM)/ITO/reflective metal multilayer structures on a silicon…