相关论文: Combinatorial sputter deposition of CrMnFeCoNi hig…

Combinatorial sputtering is a physical vapor deposition method that enables the high-throughput synthesis of compositionally varied thin films. Using this technique, the effects of stoichiometry on specific properties of alloy thin films…

A combinatorial thin-film synthesis approach combined with a high throughput analysis methodology was successfully applied to synthesize TiN/Ni coatings with optimum mechanical properties. The synthesis approach consists of the deposition…

We present a newly developed facility, comprised of a combinatorial laser molecular beam epitaxy system and an in-situ scanning tunneling microscopy (STM). This facility aims at accelerating the materials research in a highly efficient way,…

Large-area deposition of Aluminium-Scandium-Nitride (Al1-xScxN) thin films with higher Sc content (x) remains challenging due to issues such as abnormal orientation growth, stress control, and the undesired crystal phase. These anomalies…

As a single-phase alloy, CrFeCoNi is a face centered cubic (fcc) material related to the archetypical high-entropy Cantor alloy CrFeCoNiMn. For thin films, CrFeCoNi of approximately equimolar composition tends to assume an fcc structure…

Thin films of uniformly distributed Fe2O3 nanoparticles have been prepared on single crystal silicon and glass substrates by a spray pyrolysis technique in a single step using a mixture of water and ferrocene dissolved in xylene. The size…

The superconducting critical temperature (Tc > 15K) of niobium titanium nitride (NbTiN) thin films allows for low-loss circuits up to 1.1 THz, enabling on-chip spectroscopy and multi-pixel imaging with advanced detectors. The drive for…

Microscopy and diffraction measurements are presented of ultrathin binary alloy films of ruthenium and molybdenum that are obtained by standard sputter deposition. For compositions close to Ru50Mo50, we find the films to be amorphous. The…

Fueled by the 5G revolution, the demand for advanced radio frequency micro-electromechanical systems (MEMS) based on AlScN is growing rapidly. However, synthesizing high-quality, textured AlScN thin films is challenging. Current approaches…

This paper presents the development of scientific instrumentation for the fabrication of ferromagnetic thin films, by sputtering technique, for the use of 2-inch-diameter targets. Thin films were deposited using Permalloy alloy (Ni80Fe20)…

Molybdenum rhenium alloy thin films can exhibit superconductivity up to critical temperatures of $T_c=15\mathrm{K}$. At the same time, the films are highly stable in the high-temperature methane / hydrogen atmosphere typically required to…

The experimental research on the nature of diffusion by the Mo substrate atoms into the Ti and Cr deposited thin films is completed by the secondary ion-ion emission method. In [1], the initial stage of the Ti thin film on the Mo substrate…

A current approach to depositing highly plasmonic titanium nitride films using the magnetron sputtering technique assumes that the process is performed at temperatures high enough to ensure the atoms have sufficient diffusivities to form…

In this work we have synthesised thin films of MgyNi1-y(Hx) metal and metal hydride with y between 0 and 1. The films are deposited by magnetron co-sputtering of metallic targets of Mg and Ni. Metallic MgyNi1-y films were deposited with…

Compositionally graded Fe-Pt thin films were prepared on stationary 100 mm Si substrates by magnetron sputtering a base target of Fe on which a piece of Pt is asymmetrically positioned. Energy Dispersive X-Ray analysis was used to map the…

Simple vacuum evaporation technique for deposition of dyes on various solid surfaces has been developed. The method is compatible with conventional solvent-free nanofabrication processing enabling fabrication of nanoscale optoelectronic…

Thin films of a nominal Fe2CrSi alloy have been deposited by magnetron co-sputtering with various heat treatments on MgO and MgAl2O4 substrates. After heat treatment, the films were found to decompose into a nearly epitaxial Fe3Si film with…

In this work, amorphous thin films in Mg-Si-O-N system were prepared in order to investigate the dependence of optical and mechanical properties on Mg composition. Reactive RF magnetron co-sputtering from magnesium and silicon targets were…

Epitaxial thin films of the highly spin polarized Heusler compound Co2Cr0.6Fe0.4Al are deposited by dc magnetron sputtering. It is shown by XRD and TEM investigations how the use of an Fe buffer layer on MgO(100) substrates supports the…

In this paper we report the deposition of epitaxial thin films of Nd1-xSrxCoO3 with x=0, 0.2 and 0.5 on single crystalline substrates (SrTiO3 and LaAlO3) carried out by means of rf-magnetron sputtering. The deposited films are all…