相关论文: Silicon Pore Optics

The Sun Watcher with Active Pixels and Image Processing (SWAP) is an EUV solar telescope on board ESA's Project for Onboard Autonomy 2 (PROBA2) mission launched on 2 November 2009. SWAP has a spectral bandpass centered on 17.4 nm and…

Silicon single-photon avalanche diode (SPAD) is a core device for single-photon detection in the visible and the near-infrared range, and widely used in many applications. However, due to limits of the structure design and device…

Soft protons are a potential threat for X-ray missions using grazing incidence optics, as once focused onto the detectors they can contribute to increase the background and possibly induce radiation damage as well. The assessment of these…

The polarization of light conveys unique information that can be exploited by crucial applications. The bulky and costly discrete optical components used in conventional polarimeters limit their broad adoption. A compact, low-cost…

We proposed a Smartphone-based Optical Sectioning (SOS) microscope based on the HiLo technique, with a single smartphone replacing a high-cost illumination source and a camera sensor.We built our SOS with off-the-shelf optical mechanical…

We report the fabrication of diverse light guiding structures embedded in oxidised porous silicon (OPS) by means of patterned pore filling through a single photoresist mask. The pores of OPS were filled with KDP salt from unsaturated…

A method based on the particle swarm optimization (PSO) algorithm is presented to design quasi-two-dimensional (Q2D) materials. With this development, various single-layer and bi-layer materials in C, Si, Ge, Sn, and Pb were predicted. A…

Silicon photonic integrated circuit (PIC) builds on the demand for a low cost approach from established silicon-based manufacturing infrastructure traditionally built for electronics. Besides its natural abundance, silicon has desirable…

Small angle X-ray scattering (SAXS) was used to quantitatively study the morphology of aligned, mono-disperse conical etched ion tracks in thin films of amorphous silicon dioxide with aspect ratios of around 6:1, and in polycarbonate foils…

The Transient High Energy Sources and Early Universe Surveyor is an ESA M5 candidate mission currently in Phase A, with Launch in $\sim$2032. The aim of the mission is to complete a Gamma Ray Burst survey and monitor transient X-ray events.…

Integrated optical models allow for accurate prediction of the as-built performance of an optical instrument. Optical models are typically composed of a separate ray trace and diffraction model to capture both the geometrical and physical…

Elemental mapping images can be achieved through step scanning imaging using pinhole optics or micro pore optics (MPO), or alternatively by full-field X-ray fluorescence imaging (FF-XRF). X-ray optics for FF-XRF can be manufactured with…

We present in this paper an update on the design of BEaTriX (Beam Expander Testing X-ray facility), an X-ray apparatus to be realized at INAF/OAB and that will generate an expanded, uniform and parallel beam of soft X-rays. BEaTriX will be…

Fourier optics, the principle of using Fourier Transformation to understand the functionalities of optical elements, lies at the heart of modern optics, and has been widely applied to optical information processing, imaging, holography etc.…

We report on fabricating high-fill-factor plano-convex spherical and square micro-lens arrays on fused silica glass surface using CO2 laser assisted reshaping technique. Initially, periodic micro-pillars have been encoded on the glass…

We describe, and test, a method of obtaining spectrally and spatially sampled Stokes polarimetry measurements based on star test polarimetry enabled by a stress engineered optic (SEO). When the SEO is placed in the pupil plane of an imaging…

The Sunrise balloon-borne solar observatory is equipped with a one-meter aperture optical telescope, offering a unique platform for uninterrupted seeing-free observations across ultraviolet, visible, and infrared wavelengths from altitudes…

Polarization control is of fundamental importance for modern optical systems, and optical polarizers serve as critical components for enabling this functionality. Here, we experimentally demonstrate optical polarizers by integrating 2D…

Fabrication of large area (sub 1 cm cross-section) micro-optical components in a short period of time (approximately 10 min) and with lesser number of processing steps is highly desirable and cost-effective. In the recent years, femtosecond…

Silicon has attracted attention as an inexpensive and scalable material system for photonic-electronic, system-on-chip development. For this, a platform with both photodetectors and modulators working at high speeds, with excellent…