相关论文: Microwave plasma modelling in clamshell chemical v…
To achieve atomic-level characterization of the diamond (001) surface, persistent efforts have been made over the past few decades. The motivation behind the pursuit extends beyond investigating surface defects and adsorbates; it also…
Microwave plasma chemical vapor deposition (MPCVD) has been traditionally used to synthesize carbon-based materials such as diamonds, carbon nanotubes and graphene. Here we report that a rapid and catalyst-free growth of SnSe thin films can…
High radiation hardness, chemical resistance, high temperature operation capabilities stimulate a growing interest to use diamond materials as detectors of ionizing radiation. Samples of CVD-diamond materials in sizes 12 square mm and 4…
Homoepitaxial chemical vapour deposition (CVD) on high pressure high temperature (HPHT) synthetic diamond substrates allows production of diamond material with controlled point defect content. In order to minimize the extended defect…
We present first results from a number of experiments conducted on a 0.53 kg cylindrical dumbbell-shaped sapphire crystal. This is the first reported optomechanical experiment of this nature utilising a novel modification to the typical…
We investigate the optical properties of hydrogen as it undergoes a transition from the insulating molecular to the metallic atomic phase, when heated by a pulsed laser at megabar pressures in a diamond anvil cell. Most current experiments…
Thermal stability of hydrogenated amorphous Si/Ge multilayers has been investigated by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Small-Angle X-Ray Diffraction (SAXRD) techniques. Amorphous H-Si/Ge…
In recent decades, different types of plasma sources have been used for various types of plasma processing, such as, etching and thin film deposition. The critical parameter for effective plasma processing is high plasma density. One type…
We describe an experimental platform that generates infrared images of micrometer-sized samples in the high pressure region of a diamond anvil cell. Using a 2.3 micron laser as a source of radiation, the system will be particularly useful…
We present an atomistic-continuum model to simulate ultrashort laser-induced melting processes in semiconductor solids on the example of silicon. The kinetics of transient non-equilibrium phase transition mechanisms is addressed with a…
Masers - the microwave analogue of lasers - are coherent microwave sources that can act as oscillators or quantum-limited amplifiers. Masers have historically required high vacuum and cryogenic temperatures to operate, but recently masers…
A technique has been developed for depositing diamond crystals on the endfaces of optical fibers and capturing the fluorescence generated by optically active defects in the diamond into the fiber. This letter details the diamond growth on…
We report the first plasma atomic layer etching (ALE) process for diamond using a cyclic plasma sequence composed of two separated steps: oxygen surface modification and krypton ion removal. The process is implemented in an inductively…
We investigate the influence of plasma treatments, especially a 0V-bias, potentially low damage O$_2$ plasma as well as a biased Ar/SF$_6$/O$_2$ plasma on shallow, negative nitrogen vacancy (NV$^-$) centers. We ignite and sustain using our…
We study single silicon vacancy (SiV) centres in chemical vapour deposition (CVD) nanodiamonds on iridium as well as an ensemble of SiV centres in a high quality, low stress CVD diamond film by using temperature dependent luminescence…
The fabrication method of diamond nanostructures can be divided into two categories: top-down etching and bottom-growth. The early work on 3D micro-structured diamond dates back to mid-1990s, using chemical vapor infiltration (CVI)…
Radiation of short-wavelength plasma waves is studied in a cold (Te=0.5eV), large (1.2m length, 70 cm diameter), uniform, Maxwellian laboratory magnetoplasma in the upper-hybrid frequency range. Although the characteristic parameter of…
Two-dimensional magnetic materials (2D-MM) are an exciting playground for fundamental research, and for spintronics and quantum sensing. However, their large-grain large-area synthesis using scalable vapour deposition methods is still an…
We propose an analytical model to describe the mechanical deformation of single-crystal diamond following the local sub-superficial graphitization obtained by laser beams or MeV ion microbeam implantation. In this case, a local mass-density…
Irradiation with high energy photons (10.2 - 11.8 eV) was applied to small diamondoids isolated in solid rare gas matrices at low temperature. The photoproducts were traced via UV absorption spectroscopy. We found that upon ionization the…