相关论文: An Adaptive PID Autotuner for Multicopters with Ex…

This paper develops an adaptive digital autopilot for quadcopters and presents experimental results. The adaptive digital autopilot is constructed by augmenting the PX4 autopilot control system architecture with adaptive digital control…

This paper develops an adaptive autopilot for quadcopters with unknown dynamics. To do this, the PX4 autopilot architecture is modified so that the feedback and feedforward controllers are replaced by adaptive control laws based on…

This paper develops an adaptive digital autopilot for a fixed-wing aircraft and compares its performance with a fixed-gain autopilot. The adaptive digital autopilot is constructed by augmenting the autopilot architecture implemented in PX4…

This paper modifies an adaptive multicopter autopilot to mitigate instabilities caused by adaptive parameter drift and presents simulation and experimental results to validate the modified autopilot. The modified adaptive controller is…

Proportional-Integrator-Derivative (PID) controller is used in a wide range of industrial and experimental processes. There are a couple of offline methods for tuning PID gains. However, due to the uncertainty of model parameters and…

This paper presents an adaptive autopilot for fixed-wing aircraft and compares its performance with a fixed-gain autopilot. The adaptive autopilot is constructed by augmenting the autopilot architecture with adaptive control laws that are…

The paper presents a technique using reinforcement learning (RL) to adapt the control gains of a quadcopter controller. Specifically, we employed Proximal Policy Optimization (PPO) to train a policy which adapts the gains of a cascaded…

This paper introduces a learning-based low-level controller for quadcopters, which adaptively controls quadcopters with significant variations in mass, size, and actuator capabilities. Our approach leverages a combination of imitation…

This paper proposes an adaptive near-hover position controller for quadcopters, which can be deployed to quadcopters of very different mass, size and motor constants, and also shows rapid adaptation to unknown disturbances during runtime.…

The main control tasks in autonomous vehicles are steering (lateral) and speed (longitudinal) control. PID controllers are widely used in the industry because of their simplicity and good performance, but they are difficult to tune and need…

Proportional-Integral-Derivative (PID) scheme is the most commonly used algorithm for designing the controllers for unmanned aerial vehicles (UAVs). However, tuning PID gains is a non trivial task. A number of methods have been developed…

This work addresses the problem of robust attitude control of quadcopters. First, the mathematical model of the quadcopter is derived considering factors such as nonlinearity, external disturbances, uncertain dynamics and strong coupling.…

Due to noisy actuation and external disturbances, tuning controllers for high-speed flight is very challenging. In this paper, we ask the following questions: How sensitive are controllers to tuning when tracking high-speed maneuvers? What…

A reinforcement learning (RL) based methodology is proposed and implemented for online fine-tuning of PID controller gains, thus, improving quadrotor effective and accurate trajectory tracking. The RL agent is first trained offline on a…

To properly simulate and implement a quadcopter flight control for intended load and flight conditions, the quadcopter model must have parameters on various relationships including propeller thrust-torque, thrust-PWM, and thrust--angular…

Integrating unmanned aerial vehicles into daily use requires controllers that ensure stable flight, efficient energy use, and reduced noise. Proportional integral derivative controllers remain standard but are highly sensitive to gain…

A variety of control systems have been proposed for aircraft autopilot systems. Traditional approaches such as proportional controller and conventional PID (CPID) controller are widely used. PID controller has a good static performance…

Wind resistance control is an essential feature for quadcopters to maintain their position to avoid deviation from target position and prevent collisions with obstacles. Conventionally, cascaded PID controller is used for the control of…

In this paper, we present a novel developmental reinforcement learning-based controller for a quadcopter with thrust vectoring capabilities. This multirotor UAV design has tilt-enabled rotors. It utilizes the rotor force magnitude and…

Overall, in any system, the proportional term, integral term, and derivative term combined to produce a fast response time, less overshoot, no oscillations, increased stability, and no steady-state errors. Eliminating the steady state…