相关论文: Instabilities in a compressible hyperelastic cylin…
A long cylindrical cavity through a soft solid forms a soft microfluidic channel, or models a vascular capillary. We observe experimentally that, when such a channel bears a pressurized fluid, it first dilates homogeneously, but then…
Densely packed systems of thermal particles in curved geometries are frequently encountered in biological and microfluidic systems. In 2D systems, at sufficiently high surface coverage, diffusive motion is widely known to be strongly…
This work analyzes the viscous flow and elastic deformation created by the forced axial motion of a rigid cylinder within an elastic liquid-filled tube. The examined configuration is relevant to various minimally invasive medical procedures…
Wrinkling of an inextensible elastic lining of an inner-lined tube under imposed pressure is considered. A simple equation modeling the elastic properties of the lining, the pressure, and the soft-substrate forces is derived. This equation…
Growth-induced instabilities are ubiquitous in biological systems and lead to diverse morphologies in the form of wrinkling, folding, and creasing. The current work focusses on the mechanics behind growth-induced wrinkling instabilities in…
We investigate the buckling of hollow cylindrical tubes subject to their own weight and internal pressure, inspired by the columnar cells of the palisade mesophyll in dicotyledon leaves which resemble pressurized cylindrical tubes. When the…
It is shown that a channel flow of a dilute polymer solution between two widely spaced cylinders hindering the flow is an important paradigm of an unbounded flow in the case in which the channel wall is located sufficiently far from the…
Bifurcation of an elastic structure crucially depends on the curvature of the constraints against which the ends of the structure are prescribed to move, an effect which deserves more attention than it has received so far. In fact, we show…
Long, shallow microchannels embedded in thick soft materials are widely used in microfluidic devices for lab-on-a-chip applications. However, the bulging effect caused by fluid--structure interactions between the internal viscous flow and…
Microfluidic channels are integral to biomedical technology and process engineering, offering versatility in handling fluids with complex properties, often a combination of viscous and elastic attributes. Despite significant advancements in…
We numerically study confined channel foam flow around an obstacle using a two-dimensional bubble model, inspired by experiments performed in the same geometry. We systematically vary the polydispersity, the external driving force, and the…
We numerically investigate the hydrodynamic characteristics and analyze the instability mechanism of a two-dimensional inverted flag clamped by a cylinder. Two transition routes and a total of six kinds of solutions exist under this…
Localized pattern formations and "two-phase" deformations are studied theoretically in soft compressible cylinders subject to surface tension and axial loading through several force-controlled loading scenarios. By drawing upon known…
We examine transient axial creeping flow in the annular gap between a rigid cylinder and a concentric elastic tube. The gap is initially filled with a thin fluid layer. The study focuses on viscous-elastic time-scales for which the rate of…
We investigate localised bulging or necking in an incompressible, hyperelastic cylindrical tube under axial stretching and surface tension. Three cases are considered in which the tube is subjected to different constraints. In case 1 the…
Slender elastic objects such as a column tend to buckle under loads. While static buckling is well understood as a bifurcation problem, the evolution of shapes during dynamic buckling is much harder to study. Elastic rings under normal…
Previous linear bifurcation analyses have evidenced that an axially stretched soft cylindrical tube may develop an infinite-wavelength (localised) instability when one or both of its lateral surfaces are under sufficient surface tension.…
Soft materials, such as liquids, polymers, foams, gels, colloids, granular materials, and most soft biological materials, play an important role in our daily lives. From a mechanical viewpoint, soft materials can easily achieve large…
We evaluate the loss of stability of axially compressed slender and thick-walled tubes subject to a residual stress distribution. The nonlinear theory of elasticity, when used to analyze the underlying deformation, shows that the residual…
A confined incompressible elastic film does not deform uniformly when subjected to adhesive interfacial stresses but with undulations which have a characteristic wavelength scaling linearly with the thickness of the film. In the classical…