相关论文: Accessing slip activity in high purity tin with el…
Calibrating and verifying crystal plasticity material models is a significant challenge, particularly for materials with a number of potential slip and twin systems. Here we use digital image correlation on coarse-grained $\alpha$-uranium…
The mechanical properties of $\beta$-Sn single crystals have been systematically investigated using a combined methodology of micropillar tests and rate-dependent crystal plasticity modelling. The slip strength and rate sensitivity of…
Synchrotron Laue microdiffraction and Digital Image Correlation measurements were coupled to track the elastic strain field (or stress field) and the total strain field near a general grain boundary in a bent bicrystal. A 316L stainless…
The creep behaviour and microstructural evolution of a Sn-3Ag-0.5Cu wt.% sample with a columnar microstructure have been investigated through in-situ creep testing under constant stress of 30 MPa at 298 K. This is important, as 298 K is…
Dislocation core properties of tin (\beta-Sn) were investigated using the semi-discrete variational Peierls-Nabarro model (SVPN). The SVPN model, which connects the continuum elasticity treatment of the long-range strain field around a…
Zirconium alloys are used in the nuclear industry as structural materials, and can be subject to high strain rate loading conditions during forming and in the case of a reactor accident. In this context, the relationship between strain rate…
The slip strength of individual slip systems at different strain rates will control the mechanical response and strongly influence the anisotropy of plastic deformation. In this work, the slip activity and strain rate sensitivity of the <a>…
The interactions between {\delta}-hydrides and plastic slip in a commercial zirconium alloy, Zircaloy-4, under stress were studied using in situ secondary electron microscope (SEM) micropillar compression tests of single crystal samples and…
In this paper, we present a comprehensive analysis of the contact mechanics associated with a micron-sized sliding asperity, which plays a crucial role in the abrasive wear processes. Utilising nanoscratch testing, we experimentally…
The plastic deformation mechanisms of tungsten carbide at room and elevated temperatures influence the wear and fracture properties of WC-Co hardmetal composite materials. The relationship between residual defect structures, including…
A crystal plasticity theory was developed for use in simulations of dynamic loading at high pressures and strain rates. At pressures of the order of the bulk modulus, compressions o(100%) may be induced. At strain rates o(10^9)/s or higher,…
We develop and thoroughly test a stress-controlled, parallel plates shear cell that can be coupled to an optical microscope or a small angle light scattering setup, for simultaneous investigation of the rheological properties and the…
At ambient pressure tin transforms from its ground-state semi-metal $\alpha$-Sn (diamond structure) phase to the compact metallic $\beta$-Sn phase at 13$^\circ$C (286K). There may be a further transition to the simple hexagonal $\gamma$-Sn…
Consideration is given to a non-convex variational model for a shear experiment in the framework of single-crystal linearised plasticity with infinite cross-hardening. The rectangular shear sample is clamped at each end, and is subjected to…
The study of the high strain rate mechanical behaviour of materials using micropillar compression tests has been hindered so far due to the lack of suitable instrumentation. In the present study, a novel high strain rate micropillar…
A variety of severe plastic deformation (SPD) techniques have been developed to process materials to high strains and impart microstructural refinement. High pressure torsion (HPT) is one technique that imparts inhomogeneous strain to…
We perform numerical simulations to determine the shear stress and pressure of steady-state shear flow in a soft-disk model in two dimensions at zero temperature in the vicinity of the jamming transition \phi_J. We use critical point…
There is a long standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains…
We set up an original apparatus to measure the grain grain friction stress inside a granular medium composed of sodo-silicate-glass beads surrounded by a water vapor atmosphere.We analyze here the influence of the physico chemistry of water…
An assessment of the Sn unary system is presented. First, the literature on phase equilibria, the thermodynamic properties, the volume and related properties, and shock compression of tin is thoroughly reviewed. Second, the Sn system is…