相关论文: Influence of Furnace Baking on Q-E Behavior of Sup…
Nb$_3$Sn has great potential to become the material of choice for fabrication of SRF cavities. The higher critical temperature of Nb$_3$Sn potentially allows for an increased operational temperature in SRF cavities, which could enable…
We propose a model to explain power dissipation leading to the formation of hot spots in the inner walls of niobium thin film superconducting RF cavities. The physical mechanism that we explore is due to the constriction of surface…
The negative-U impurity stripes confining the edge channels of semiconductor quantum wells are shown to allow the effective cooling inside in the process of the spin-dependent transport, with the reduction of the electron-electron…
The superconducting properties of polycrystalline Sr0.6K0.4Fe2As2 were strongly influenced by Ag doping (Supercond. Sci. Technol. 23 (2010) 025027). Ag addition is mainly dominated by silver diffusing, so the annealing process is one of the…
Superconducting microwave cavities have found applications in many areas including quantum computing, particle accelerators, and dark matter searches. Their extremely high quality factors translate to very narrow bandwidth, which makes them…
Particle physics and radio-frequency (RF) superconductivity have driven each other on since the 1970s. The unique properties of superconductors (SC) have been the enabling keys for the realization of accelerators with always increased…
In the context of engineered quantum systems, there is a demand for superconducting tunable devices able to operate with high Q-factors at power levels equivalent to only a few photons. In this work, we developed a 3D microwave reentrant…
The development and the use of quantum technologies are hindered by a fundamental challenge: Quantum materials exhibit macroscopic quantum properties at extremely low temperatures due to the loss of quantum coherence at elevated…
We theoretically analyze the effect of parameter fluctuations on the superradiance phase transition in a setup where a large number of superconducting qubits are coupled to a single cavity. We include parameter fluctuations that are typical…
A series of numerical simulations of Rayleigh-B{\'e}nard convection in a cubic cavity are conducted in order to examine the structure of the thermal boundary layer in case of mixed boundary conditions. The main goal of the study is the…
We fabricate superconducting ion traps with niobium and niobium nitride and trap single 88Sr ions at cryogenic temperatures. The superconducting transition is verified and characterized by measuring the resistance and critical current using…
Recent advances in surface treatments of Niobium superconducting radio frequency (SRF) cavities have led to substantially increased Q-factors and maximum surface field. This poses theoretical challenges to identify the mechanisms…
SRF cavities for particle acceleration are conventionally operated immersed in a bath of liquid helium at 4.2 K and below. Although this cooling configuration is practically and economically viable for large scientific accelerator…
Results are reported from an experiment on RF pulsed heating of copper at SLAC. Damage in the form of cracks may be induced on the surface after the application of many pulses of RF. The experiment consists of two circularly cylindrical…
Cooling microwave resonators to near the quantum ground state, crucial for their operation in the quantum regime, is typically achieved by direct device refrigeration to a few tens of millikelvin. However, in quantum experiments that…
We demonstrate the operation of superconducting coplanar microwave resonators in a very large frequency range up to 50 GHz. The resonators are fabricated from niobium thin films on sapphire substrates and optimized for these high…
Advances in SRF technology over the last 40 years allowed achieving accelerating gradients ~ 50 MV/m corresponding to peak surface magnetic field close to the theoretical limit of niobium. However, the quality factor decreases significantly…
A new linac using superconducting quarter-wave resonators (QWR) is under construction at CERN in the framework of the HIE-ISOLDE project. The QWRs are made of niobium sputtered on a bulk copper substrate. The working frequency at 4.5 K is…
The negative-U impurity stripes confining the edge channels of semiconductor quantum wells are shown to allow the effective cooling inside in the process of the spin-dependent transport. The aforesaid promotes also the creation of composite…
Nb3Sn is a promising next-generation material for superconducting radiofrequency cavities, with significant potential for both large scale and compact accelerator applications. However, so far, Nb3Sn cavities have been limited to cw…