相关论文: Graphite creep negation during flash spark plasma …
Sulfur intercalated graphite composites with diamagnetic transitions at 6.7 K and 37 K are prepared. The magnetization hysteresis loops (MHL), Xray diffraction patterns, and resistance were measured. From the MHL, a slight superconducting…
We report experimental results indicating possible high-temperature superconductivity in graphite intercalation compounds synthesized with lithium-based alloys. Temperature-dependent measurements of magnetization, trapped magnetic flux, and…
Samples of $\alpha$-SiC have been sintered with liquid phase (LPS) to 1950 $^\circ$C, in atmosphere of argon and processing times between 1 and 7 hours. Using scanning electron microscopy (SEM) the microstructure of the samples has been…
With the advances in miniaturization, understanding and controlling properties of significant technological systems like silicon in nano regime assumes considerable importance. It turns out that small silicon clusters in the size range of…
In this letter we describe the observation of a magnetic field dependent electronic gap, suggestive of local superconductivity, in the point-contact spectrum of micro-crystalline graphite. Magnetic field dependent point-contact spectroscopy…
It has been claimed that graphite hosts superconductivity at room temperature, although all efforts to isolate it have been vain. Here we report a separation method that uses magnetic field gradients to sort the superconducting from normal…
The thermal and mechanical stability of graphene is important for many potential applications in nanotechnology. We calculate the temperature dependence of lattice parameter, elastic properties and heat capacity by means of atomistic Monte…
The interplay between thermal and quantum fluctuations controls the competition between phases of matter in strongly correlated electron systems. We study finite-temperature properties of the strongly coupled two-dimensional doped Hubbard…
Numerical and closed-form analytic expressions for plasmon dispersion relations and rates of dissipation are first obtained at finite-temperatures for free-standing gapped graphene. These closed-system results are generalized to an open…
YBa$_{2}$Cu$_{3}$O$_{7-{\delta}}$ coated conductors (CCs) have achieved high critical current densities ($\textit{J}_{c}$) that can be further increased through the introduction of additional defects using particle irradiation. However,…
Spark plasma sintering (SPS) of MgAl2O4 powder was investigated at temperatures between 1200 and 1300{\deg}C. A significant grain growth was observed during densification. The densification rate always exhibits at least one strong minimum,…
This study presents a fabrication process for lithium-drifted silicon (Si(Li)) detectors that, compared to previous methods, allows for mass production at a higher yield, while providing a large sensitive area and low leakage currents at…
A mathematical model is presented for the Joule heating that occurs in a ceramic powder compact during the process of flash sintering. The ceramic is assumed to have an electrical conductivity that increases with temperature, and this leads…
We systematically investigate the chemical vapor deposition growth of graphene on Ge(110) as a function of the deposition temperature close to the Ge melting point. By merging spectroscopic and morphological information, we find that the…
Graphene was recently proposed as a material for heat removal owing to its extremely high thermal conductivity. We simulated heat propagation in silicon-on-insulator circuits with and without graphene lateral heat spreaders. Numerical…
Crystallographic texture engineering in ceramics is essential to achieve direction-specific properties. Current texture engineering methods are time-consuming, energy extensive, or can lead to unnecessary diffusion of added dopants. Herein,…
Various electronic phases emerge when applying high magnetic fields in graphite. However, the origin of a semimetal-insulator transition at $B \simeq 30\; \textrm{T}$ is still not clear, while an exotic density-wave state is theoretically…
Integration of thin-film oxide piezoelectrics on glass is imperative for the next generation of transparent electronics to attain sensing and actuating functions. However, their crystallization temperature (above 650 {\deg}C) is…
The mechanisms of fast low-temperature Spark Plasma Sintering (SPS) of W + 10% wt. Ni powders were investigated. The powder compositions were obtained in two methods: (i) by mixing W and Ni powders in a specified ratio (hereinafter referred…
We numerically investigate the athermal creep deformation of amorphous materials having a wide range of stability. The imposed shear stress serves as the control parameter, allowing us to examine the time-dependent transient response…