相关论文: Effect of Surface Treatment on High-Temperature Ox…
Surface oxidation of high-purity copper is accelerated under tribological loading. Tribo-oxide formation at room temperature is associated with diffusion processes along defects, such as dislocations or grain boundaries. Here, we embark on…
To enhance our understanding of oxidation in high-entropy alloys, the early stages of oxidation on the surface of Al10Nb15Ta5Ti30Zr40 were studied using density functional theory and thermodynamic modeling. Surface slabs were generated from…
We investigate the correlation between surface roughness and corresponding $T_2$ times of nearsurface nitrogen-vacancy centers (~7 nm/ 5 keV implantation energy) in diamond. For this purpose we compare five different polishing techniques,…
Time of Flight Secondary Ion Mass Spectroscopy, X-Ray Photoelectron Spectroscopy, in situ Photo-Current Spectroscopy and electrochemical analysis were combined to characterize the physicochemical alterations induced by electrochemical…
Effects of steel alloying elements on the formation of the surface oxide layer of hot-dip galvanized press hardened steel after austenitization annealing were examined with various advanced microscopy and spectroscopy techniques. The main…
Developing scalable and environmentally benign anticorrosion coatings is critical for protecting steel infrastructure in chloride-rich environments. Here, a nacre-inspired multilayer epoxy coating reinforced with four MXene systems is…
Anomalous motional heating is a major obstacle to scalable quantum information processing with trapped ions. While the source of this heating is not yet understood, several previous studies suggest that surface contaminants may be largely…
While developing nuclear materials, predicting their behavior under long-term irradiation regimes spanning decades poses a significant challenge. We developed a novel Kinetic Monte Carlo (KMC) model to explore the precipitation behavior of…
We report the results of an x-ray scattering study that reveals oxidation kinetics and formation of a previously unreported crystalline phase of SnO at the liquid-vapour interface of Sn. Our experiments reveal that the pure liquid Sn…
Micro Arc Oxidation (MAO) is an electrochemical approach for the surface treatment usually applied on so called valve metals such as Al, Mg and Ti. MAO is usually carried out an aqueous electrolyte, which involves a bath cooling and leads…
The microstructural stability and mechanical properties of superalloys at high temperatures are significantly influenced by the composition and nature of the solutes they contain. Most of the alloys with high solvus temperature have higher…
Kinetics of silicon dry oxidation are investigated theoretically and experimentally at low temperature in the nanometer range where the limits of the Deal and Grove model becomes critical. Based on a fine control of the oxidation process…
Electropolishing is the premier surface preparation method for high-Q, high-gradient superconducting RF cavities made of Nb. This leaves behind an apparently smooth surface, yet the achievable peak magnetic fields fall well below the…
High strength 7xxx Al-alloys are currently commonly used in aerospace and are expected to be increasingly employed in the automotive sector for weight reduction purposes. These alloys can however be sensitive to stress-corrosion cracking…
Alkali halide (100) crystal surfaces are poorly wetted by their own melt at the triple point. We carried out simulations for NaCl(100) within the well tested BMHFT model potential. Calculations of the solid-vapor, solid-liquid and…
We present a first-principles atomistic thermodynamics framework to describe the structure, composition and segregation profile of an alloy surface in contact with a (reactive) environment. The method is illustrated with the application to…
Room and high temperature mechanical properties of reactive magnetron sputtered TaSiN coatings were measured using nanoindentation (between 25C and 500C). Fracture toughness was also evaluated at a similar temperature range using the…
The surface resistance Rs of superconducting cavities prepared by sputter coating a thin niobium film on a copper substrate increases significantly stronger with the applied RF field compared to cavities of bulk material. A possible cause…
The formation of ultrathin oxide layers on metal surfaces is a non-thermally-activated process which takes place spontaneously at very low temperatures within nanoseconds. This paper reports mechanistic details of the initial oxidation of…
Polarization dynamics and domain structure evolution in ferroelectric Al$_{0.93}$B$_{0.07}$N are studied using piezoresponse force microscopy and spectroscopies in ambient and controlled atmosphere environments. The application of negative…