相关论文: Superpolished OAPs for WFIRST CGI
Broadband coronagraphy with deep nulling and small inner working angle has the potential of delivering images and spectra of exoplanets and other faint objects. In recent years, many coronagraphic schemes have been proposed, the most…
On-chip optical trapping systems allow for high scalability and lower the barrier to access. Systems capable of trapping multiple particles typically come with high cost and complexity. Here we present a technique for making parabolic…
Future instruments need efficient coronagraphs over large spectral ranges to enable broadband imaging or spectral characterization of exoplanets 1e8 fainter than their star. Several solutions were proposed. Pupil apodizers can attenuate the…
Efficient optimization of topology and raster angle has shown unprecedented enhancements in the mechanical properties of 3D printed materials. Topology optimization helps reduce the waste of raw material in the fabrication of 3D printed…
We demonstrate an optical phased-array (OPA) equipped with a 3D-printed facet-attached element for shaping and deflection of the emitted beam. The beam shaper combines freeform refractive surfaces with total-internal-reflection (TIR)…
In optical imaging, achieving high resolution often comes at the expense of a shallow depth of field. This means that when using a standard microscope, any minor movement of the object along the optical axis can cause the image to become…
Additive manufacturing of polymer bonded magnets is a recently developed technique, for single-unit production, and for structures that have been impossible to manufacture previously. Also new possibilities to create a specific stray field…
The possibility of producing polymer-bonded magnets with the aid of additive processes, such as 3D printing, opens up a multitude of new areas of application. Almost any structures and prototypes can be produced cost-effectively in small…
An ideal coronagraph with a band-limited image mask can efficiently image off-axis sources while removing identically all of the light from an on-axis source. However, strict mask construction tolerances limit the utility of this technique…
The common layer-by-layer deposition of regular, 3-axis 3D printing simplifies both the fabrication process and the 3D printer's mechanical design. However, the resulting 3D printed objects have some unfavourable characteristics including…
High-contrast imaging provided by a coronagraph is critical for the direction imaging of the Earth-like planet orbiting its bright parent star. A major limitation for such direct imaging is the speckle noise that is induced from the…
Moir\'e superlattices constitute a versatile platform to investigate emergent phenomena arising from the interplay of strong correlations and topology, while offering flexible in situ tunability. However, the fabrication of such moir\'e…
While multi-axis 3D printing can align continuous fibers along principal stresses in continuous fiber-reinforced thermoplastic (CFRTP) composites to enhance mechanical strength, existing methods have difficulty generating toolpaths with…
The canalization of terahertz surface plasmon polaritons using a modulated graphene monolayer is investigated for subwavelength imaging. An anisotropic surface conductivity formed by a set of parallel nanoribbons with alternating positive…
3D printers based on the Fused Decomposition Modeling create objects layer-by-layer dropping fused material. As a consequence, strong overhangs cannot be printed because the new-come material does not find a suitable support over the last…
WFIRST-CGI is a NASA technology demonstration mission that is charged with demonstrating key technologies for future exo-Earth imaging missions in space. In the process, it will obtain images and low-resolution spectra of a handful to a…
Previous methods utilize the Neural Radiance Field (NeRF) for panoptic lifting, while their training and rendering speed are unsatisfactory. In contrast, 3D Gaussian Splatting (3DGS) has emerged as a prominent technique due to its rapid…
We propose a novel method to generate a small set of ruled surfaces that do not collide with the input shape for linear hot-wire rough machining. Central to our technique is a new observation: the ruled surfaces constructed by vertical…
Optical trapping can be used to manipulate the three-dimensional (3-D) motion of spherical particles based on the simple prediction of optical forces and the responding motion of samples. However, controlling the 3-D behaviour of…
Controlling the intensity distribution of laser pulses in the focal region is essential for optimizing optically generated plasma waveguides and enabling advanced plasma acceleration techniques, including dephasingless wakefield…