相关论文: Creep deformation of WC hardmetals with iron-based…
The creep mechanism in the compression testing of the tungsten carbide with different grain sizes has been studied. The WC samples with high density (96.1-99.2%) were obtained by SPS from nano-, submicron, and micron-grade WC powders. The…
The creep behaviour of a creep-resistant AE42 magnesium alloy reinforced with Saffil short fibres and SiC particulates in various combinations has been examined in the longitudinal direction, i.e., the plane containing random fibre…
A systematic study of the compression creep properties of a single-crystalline Co-base superalloy (Co-9Al-7.5W-2Ta) was conducted at 950 {\deg}C, 975 {\deg}C and 1000 {\deg}C to reveal the influence of temperature and the resulting…
Co-base superalloys are considered as promising high temperature materials besides the well-established Ni-base superalloys. However, Ni appears to be an indispensable alloying element also in Co-base superalloys. To address the influence…
A micromechanical model at the microscale within a crystal plasticity self-consistent model, is used to analyse loading histories in Type 316H stainless steel, common to structural components in high-temperature power plants. The study…
The surprisingly rapid relaxation of the sustainable current density in the critical state of single crystalline Ba$_{1-x}$K$_{x}$Fe$_{2}$As$_{2}$ is investigated for magnetic fields oriented parallel to the c-axis and to the $ab$--plane…
The creep behaviour and microstructural evolution of a Sn-3Ag-0.5Cu wt.% sample with a columnar microstructure have been investigated through in-situ creep testing under constant stress of 30 MPa at 298 K. This is important, as 298 K is…
Radiation creep and swelling are irreversible deformation phenomena occurring in materials irradiated even at low temperatures. On the microscopic scale, energetic particles initiate collision cascades, generating and eliminating defects…
The nonequilibrium dynamics of diffusion-mediated plasticity and creep in materials subjected to constant load at high homologous temperatures is studied atomistically using Phase Field Crystal (PFC) methods. Creep stress and grain size…
The analysis and understanding of creep damage of Grade 91 steel welded joints is an important topic in the energy industry. Creep tests on welded joints were carried out at 600$^{\circ}$C, 100MPa and then interrupted at 0%, 10%, 30%, 50%,…
Understanding the creep mechanisms and deformation response at different stresses and temperatures is crucial for design using nickel-base superalloys for high-temperature applications. In this study, the creep behaviour of a newly designed…
The plastic deformation of Cr3+ -doped a-Al2 O3 (ruby) with four distinct Cr concentrations has been studied at temperatures between 900 and 1500 $^\circ$C. The mechanical tests indicate that the processes of dislocation multiplication and…
The stress-induced yielding scenario of colloidal gels is investigated under rough boundary conditions by means of rheometry coupled to local velocity measurements. Under an applied shear stress, the fluidization of gels made of attractive…
Advanced g-TiAl based intermetallics Mo-bearing have been developed to obtain the fine-grained microstructure required for superplastic deformation to be used during further processing. In the present work we have studied an alloy of…
Chromium substituted cobalt ferrite with grain size less than the single domain (approx. 70 nm) has been prepared by the sol-gel method. XRD analysis reveals that the samples crystallize to cubic symmetry with spacegroup number 227. Two…
Compacted unsaturated swelling clay is often considered as a possible buffer material for deep nuclear waste disposal. An isotropic cell permitting simultaneous control of suction, temperature and pressure was used to study the…
Flow in soft materials encompasses a wide range of viscous, plastic and elastic phenomena which provide challenges to modelling at the microscopic level. To create a controlled flow, we perform falling ball viscometry tests on packings of…
Granular packings display a wealth of mechanical features which are of widespread significance. One of these features is creep: the slow deformation under applied stress. Creep is common for many other amorphous materials such as many…
This work gives insights into processing and characterisation of bulk nanocrystalline FeCr materials. The investigated FeCr alloys, consisting of 30, 50 and 70 at.% ferromagnetic Fe and remaining anti-ferromagnetic Cr, are processed by arc…
We present creep experiments on fiber composite materials with controlled heterogeneity. Recorded strain rates and acoustic emission rates exhibit a power law relaxation in the primary creep regime (Andrade law) followed by a power law…