相关论文: Method to Determine the Closed-Loop Precision of R…
Recent advances in glass fabrication technology have allowed for the development of high-precision inertial sensors in devices weighing in the order of grams. Gram-scale inertial sensors can be used in many applications with tight space or…
Nanomechanical resonators are used in building ultra-sensitive mass and force sensors. In a widely used resonator based sensing paradigm, each modal resonance frequency is tracked with a phase-locked loop (PLL) based system. There is great…
The frequency response analysis describes the steady-state responses of a system to sinusoidal inputs at different frequencies, providing control engineers with an effective tool for designing control systems in the frequency domain.…
Nanomechanical resonators are used as high performance detectors in a variety of applications such as mass spectrometry and atomic force microscopy. Initial emphasis in nanomechanical resonant sensor research was on increasing the…
In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting…
We present a method for analyzing the phase noise of oscillators based on feedback driven high quality factor resonators. Our approach is to derive the phase drift of the oscillator by projecting the stochastic oscillator dynamics onto a…
This paper introduces a closed-loop frequency analysis tool for reset control systems. To begin with sufficient conditions for the existence of the steady-state response for a closed-loop system with a reset element and driven by periodic…
The microwave cavity perturbation method is often used to determine material parameters (electric permittivity and magnetic permeability) at high frequencies and it relies on measurement of the resonator parameters. We present a method to…
Nanomechanical resonators can serve as high performance detectors and have potential to be widely used in the industry for a variety of applications. Most nanomechanical sensing applications rely on detecting changes of resonance frequency.…
Surface acoustic wave (SAW) sensors in the form of two-port resonators or delay lines are widely used in various fields of application. Readout of such sensors is achieved by electronic systems operating either in an open-loop or in a…
We present a novel design of loop-gap resonator, the loop-zag resonator, for sub-X-band electron-spin resonance spectroscopy. The loop-zag design can achieve improved coupling to small-sample spin systems through the improvement of sample…
Nonlinear Resonant Ultrasound Spectroscopy (NRUS) experiments that rely on repeated sampling of resonance curves are inherently sensitive to measurement protocol due to evolution of material parameters caused by fast and slow dynamic…
The resolution of resonant sensors is fundamentally limited by the presence of noise. Thermomechanical noise, intrinsic to the resonator, sets the ultimate sensor performance when all other noise sources have been eliminated. For linear…
Resonant electromagnetic actuators have been broadly used as vibration motors for mobile devices given their ability of generating relatively fast, strong, and controllable vibration force at a given resonant frequency. Mechanism of the…
In multi-qubit superconducting systems utilizing flip-chip technology, achieving high accuracy in resonator frequencies is of paramount importance, particularly when multiple resonators share a common Purcell filter with restricted…
Mechanical resonators are widely used as precision clocks and sensitive detectors that rely on the stability of their eigenfrequencies. The phase noise is determined by different factors ranging from thermal noise and frequency noise of the…
In this work the behavior of optical micro-ring resonators, especially when functioning as refractive index sensors, is studied in detail. Two configurations are considered, namely a linear waveguide coupled to a circular one and two linear…
Micro and nanomechanical resonators have been extensively researched in recent decades for applications to time and frequency references, as well as highly sensitive sensors. Conventionally, the operation of these resonant sensors is…
Studying the dynamical behavior of micro- and nano-mechanical systems (MEMS and NEMS) is essential in various fields from nonlinear dynamics to quantum technologies. Hence, it is important to be able to precisely monitor the mechanical…
Precise microwave measurements of sample conductivity, dielectric, and magnetic properties are routinely performed with cavity perturbation measurements. These methods require the accurate determination of quality factor and resonant…