相关论文: Thermal Conductivity Measurement of Supported Thin…
Organic thin film materials with molecular ordering are gaining attention as they exhibit semiconductor characteristics. When using them for electronics, the thermal management becomes important, where heat dissipation is directional owning…
The reduction of the thermal conductivity in nanostructures opens up the possibility of exploiting for thermoelectric purposes also materials such as silicon, which are cheap, available and sustainable but with a high thermal conductivity…
The 3$\omega$ method is a dynamic measurement technique developed for determining the thermal conductivity of thin films or semi-infinite bulk materials. A simplified model is often applied to deduce the thermal conductivity from the slope…
The accurate determination of thermal conductivity $\kappa(T)$ in bulk materials at room temperature and above is crucial for evaluating their compatibility for specific applications. The 3$\omega$ technique is an established methodology…
Short review on the different models for the electro-thermal 3-omega method. We present the deduction of the fundamental relation between the 3-omega voltage with the temperature rise to determine the thermal conductivity. The usage of the…
Thermal conductivity and interfacial thermal conductance play crucial roles in the design of engineering systems where temperature and thermal stress are of concerns. To date, a variety of measurement techniques are available for both bulk…
Thin film YIG (Y$_3$Fe$_5$O$_{12}$) is a prototypical material for experiments on thermally generated pure spin currents and the spin Seebeck effect. The 3-omega method is an established technique to measure the cross-plane thermal…
The thermal conductivity of thin films is commonly estimated using the 3-omega experimental method. When calibrating the test setup, it is customary to use a specimen with a known thermal conductivity for validation. However, when…
Anisotropic thermal transport plays a key role in both theoretical study and engineering practice of heat transfer, but accurately measuring anisotropic thermal conductivity remains a significant challenge. To address this issue, we propose…
We developed a novel contactless frequency-domain approach to study thermal transport, which is particularly convenient when thermally anisotropic materials are considered. The method is based on a similar line-shaped heater geometry as…
Thermal management of integrated circuits (ICs) is important to prevent thermal hotspots which are the leading cause of IC failure. Thermal management is even more critical in 3D integrated circuits (3D ICs) as the prevalence of thermal…
Accurate measurements of the cross-plane thermal conductivity {\Lambda}_cross of a high-thermal-conductivity thin film on a low-thermal-conductivity ({\Lambda}_s) substrate (e.g., {\Lambda}_cross/{\Lambda}_s>20) are challenging, due to the…
Solid heterostructures composed of substrates and epitaxial films are extensively used in advanced technologies, and their thermophysical properties fundamentally determine the performance, efficiency, reliability, and lifetime of the…
Toward measuring the thermal properties of exfoliated atomically thin materials, we demonstrate simultaneous measurements of the thermal conductivity and specific heat in suspended membranes. We use the 3{\omega} technique applied to…
The 3$\omega$ method is widely used to measure the thermal conductivity and the specific heat of wires and thin films. These measurements are typically performed under high vacuum conditions, which justify the use of heat transfer models…
This work combines the principles of the heat spreader method and imaging capability of the thermoreflectance measurements to measure the in-plane thermal conductivity of thin-films without the requirement of film suspension or multiple…
We demonstrate a simple and quick method for the measurement of the in-plane thermal conductance of thin films via steady-state IR thermography. The films are suspended above a hole in an opaque substrate and heated by a homogeneous visible…
A numerical modeling study based on 3D finite element method (FEM) simulation and 1D analytical solutions has been carried out to evaluate the capabilities of two ac methods for measuring in-plane thermal conductivity of thin film deposited…
We have designed and developed a new experimental setup, based on the 3-omega method, to measure thermal conductivity, heat capacity and electrical resistivity of a variety of samples in a broad temperature range (2-550 K) and under…
We have developed a transient thermoreflectance technique using picosecond pulsed and cw laser to study thermal conductivity and interface conductance in both thin-films and bulk materials. A real time-resolved system observes a thermal…