相关论文: Direct synthesis of p-type bulk BiCuSeO oxyselenid…

We show here for the first time the use of a cold sintering process (CSP) to sinter CoSb3-based thermoelectric materials. CSP at 150 {\deg}C for 90 min under a uniaxial pressure of 750 MPa yields pieces with a relative density of 86 %,…

We report superconductivity in a new layered bismuth oxyselenide LaO0.5F0.5BiSe2 with the ZrCuSiAs-type structure composed of alternating superconducting BiSe2 and blocking LaO layers. The superconducting transition temperature is TC =…

We fabricate large-area atomically thin MoS$_2$ layers through the direct transformation of crystalline molybdenum MoS$_2$ (MoO$_3$) by sulfurization at relatively low temperatures. The obtained MoS2 sheets are polycrystalline (~10-20 nm…

The mechanisms of fast low-temperature Spark Plasma Sintering (SPS) of W + 10% wt. Ni powders were investigated. The powder compositions were obtained in two methods: (i) by mixing W and Ni powders in a specified ratio (hereinafter referred…

Reactive synthesis is the process of using temporal logic specifications in LTL to generate correct controllers, but its use has been restricted to Boolean specifications. Recently, a Boolean abstraction technique allows to translate LTL T…

Selective laser reaction sintering techniques (SLRS) techniques were investigated for the production of near net-shape non-oxide ceramics including SiC, Si$_3$N$_4$, and HfC/SiC composites that might be compatible with prevailing powder bed…

By using the semi-wet synthesis method, lead-free ferroelectric materials Ba0.9Sr0.1Ti1-xSnxO3 with x = 0, 0.02, 0.05, and 0.10 (abbreviated as BSTS) were prepared and their structural, electric and electrocaloric properties were…

Polymers that extend covalently in two dimensions have attracted recent attention as a means of combining the mechanical strength and in-plane energy conduction of conventional two-dimensional (2D) materials with the low densities,…

We present a two-step technique for the synthesis of superconducting CuxBi2Se3. Cu0.15Bi2Se3 single crystals were synthesized using the melt-growth method. Although these samples are non-superconducting, they can be employed to generate…

Bulk samples of MgB2 have been formed by hot isostatic pressing (HIPping) of commercial powder at 100MPa and 950=B0C. The resulting material is 100% dense with a sharp superconducting transition at 37.5K. Microstructural studies have…

Thin-film-like high temperature superconducting Bi2Sr2CaCu2O8+x single crystals (TSB) with a typical thickness of 20-200 nm is produced by mechanical exfoliation. The TSB, which shows excellent superconductivity, can adhere firmly to the…

The modeling of powder compaction process, such as spark plasma sintering (SPS), requires the determination of the visco-plastic deformation behavior of the particle material including the viscosity moduli. The establishment of these…

Simultaneous analyses are performed for cross section data of elastic scattering, fusion, Coulomb breakup, and other direct yields for the $^{6}$He+$^{209}$Bi system at near-Coulomb-barrier energies. The bare and dynamical polarization…

Sb-doped Bi2Te3 is known since the 1950s as the best thermoelectric material for near-room temperature operation. Improvements in material performance are expected from nanostructuring procedures. We present a straightforward and fast…

The preparation method of thermoelectric PbTe-CdTe semiconductor nanocomposite in the form of a bulk material doped with Bi, I or Na, intended for production the mid-temperature thermoelectric energy generators is presented. The method…

We present the results of our various attempts to prepare the presumably room-temperature and ambient-pressure superconducting compound Pb$_9$Cu(PO$_4$)$_6$O (LK-99). We experimented with various starting materials, and used several…

The paper reports on the preparation of xenotime-structured ceramics by the Spark Plasma Sintering (SPS) method. Phosphates Y$_{0.95}$Gd$_{0.05}$PO$_4$ (YPO$_4$:Gd) were obtained by the sol-gel method. The synthesized nanopowders are…

We calculate the nucleosynthesis inside the hot bubble formed in the jittering-jets model for core collapse supernovae (CCSNe) explosions, and find the formation of several times 10^-4 M_\odot of r-process elements. In the jittering-jets…

High-quality polycrystalline samples of LaO0.5F0.5BiS2 were obtained using high-pressure synthesis technique. The LaO0.5F0.5BiS2 sample prepared by heating at 700 C under 2 GPa showed superconductivity with superconducting transition…

We introduce the first approach to volumetrically generate relativistically thermal plasma at gas-jet--accessible density. Using fully kinetic simulations and theory, we demonstrate that two stages of direct laser acceleration driven by two…