相关论文: On the Human Control of a Multiple Quadcopters wit…

In this thesis we are interested in applying distributed estimation, control and optimization techniques to enable a group of quadcopters to fly through openings. The quadcopters are assumed to be equipped with a simulated bearing and…

The leader-follower formation control analysis for multiple quad-rotor systems is investigated in this paper. To achieve predefined formation in the three-dimensional air space ($x,y$ and $z$), a novel local tracking control law and a…

Small multi-rotor unmanned aerial vehicles (UAVs), mainly quadcopters, are nowadays ubiquitous in research on aerial autonomy, including serving as scaled-down models for much larger aircraft such as vertical-take-off-and-lift vehicles for…

Unmodeled aerodynamic disturbances pose a key challenge for multirotor flight when multiple vehicles are in close proximity to each other. However, certain missions \textit{require} two multirotors to approach each other within 1-2…

The quadrotor is a $6$ degrees-of-freedom (DoF) system with underactuation. Adding a spherical pendulum on top of a quadrotor further complicates the task of achieving any output tracking while stabilizing the rest. In this report, we…

Although increased automation has made it easier to control aircraft, ensuring a safe interaction between the pilots and the autopilots is still a challenging problem, especially in the presence of severe anomalies. Current approach…

Autonomously controlling quadrotors in large-scale subterranean environments is applicable to many areas such as environmental surveying, mining operations, and search and rescue. Learning-based controllers represent an appealing approach…

Connected and automated vehicles (CAVs) can be beneficial for improving the operation of highway bottlenecks such as weaving sections. This paper proposes a bi-level control approach based on an upper-level deep reinforcement learning…

We present experimental results using a passive whole-body control approach for quadruped robots that achieves dynamic locomotion while compliantly balancing the robot's trunk. We formulate the motion tracking as a Quadratic Program (QP)…

This work addresses the challenge of enabling a team of quadrupedal robots to collaboratively tow a cable-connected load through cluttered and unstructured environments while avoiding obstacles. Leveraging cables allows the multi-robot…

Quadrotors are agile. Unlike most other machines, they can traverse extremely complex environments at high speeds. To date, only expert human pilots have been able to fully exploit their capabilities. Autonomous operation with on-board…

This paper addresses the trajectory tracking control problem for underactuated VTOL UAVs. According to the different actuation mechanisms, the most common UAV platforms can achieve only a partial decoupling of attitude and position tasks.…

A motion-based control interface promises flexible robot operations in dangerous environments by combining user intuitions with the robot's motor capabilities. However, designing a motion interface for non-humanoid robots, such as…

The cooperation of a human pilot with an autonomous agent during flight control realizes parallel autonomy. We propose an air-guardian system that facilitates cooperation between a pilot with eye tracking and a parallel end-to-end neural…

Teleoperation plays a critical role in intuitive robot control and imitation learning, particularly for complex tasks involving mobile manipulators with redundant degrees of freedom (DoFs). However, most existing master controllers are…

This paper focuses on the design of a stabilizing control law for an aerial vehicle which is physically connected to a ground station by means of a tether cable. By taking advantage of the tensile force acting along the taut cable, it is…

This paper presents a design of oscillation damping control for the cable-Suspended Aerial Manipulator (SAM). The SAM is modeled as a double pendulum, and it can generate a body wrench as a control action. The main challenge is the fact…

This paper presents a robust neural control design for a three-drone slung payload transportation system to track a reference path under external disturbances. The control contraction metric (CCM) is used to generate a neural exponentially…

This paper presents an estimation and control algorithm for an aerial manipulator using a hexacopter with a 2-DOF robotic arm. The unknown parameters of a payload are estimated by an on-line estimator based on parametrization of the aerial…

Dynamics of the hybrid systems of aerial cable-ways is investigated. The eigenvalue problems are considered for such hybrid systems with different assumptions. An overview of different methods for eigenvalue problems is given. In the…