相关论文: Site selective synthesis of in situ Ni filled mult…
Growth of carbon nanotubes (CNTs) was performed by atmospheric pressure chemical vapour deposition (APCVD) of propane on Si(111) with a pre-treated Ni overlayer acting as a catalyst. Prior to the growth of CNTs, a thin film of Ni was…
The effect of Fe and Ni catalysts on the synthesis of carbon nanotubes (CNTs) using atmospheric pressure chemical vapor deposition (APCVD) was investigated. Field emission scanning electron microscopy (FESEM) analysis suggests that the…
Partially Fe filled multi-walled carbon nanotubes (MWCNTs) were grown by chemical vapor deposition with propane at 850 {\deg}C using a simple mixture of iron (III) acetylacetonate (Fe(acac)3) powder and conventional photoresist. Scanning…
In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as…
Nitrogen doped single wall carbon nanotubes have many functional benefits. Doping opens the possibility to control the electronic energy levels, surface energy, surface reactivity and charge carrier density. The additional electron in the…
This investigation deals with the effect of growth temperature on the growth behavior of Fe filled multiwalled carbon nanotubes (MWCNTs). Carbon nanotube (CNT) synthesis was carried out in a thermal chemical vapor deposition (CVD) reactor…
We used microcontact printing to pattern a silicon surface with an iron-containing catalytic solution. Multi-wall carbon nanotubes were subsequently grown on the patterned areas by chemical vapor deposition at temperatures between 650 and…
We report a process to fabricate carbon nanotubes (CNT) by chemical vapor deposition at predetermined location. This process was enabled by patterning catalyst nanoparticles directly on silicon substrates with nanometer-scale precision…
Three different catalysts (Fe, Ni, Co nitrates dissolved in ethanol) were patterned on a SiO2/Si substrate and multi-wall carbon nanotubes were grown by catalytic decomposition of acetylene. We compare the growth of the carbon…
Fe filled carbon nanotubes were synthesized by atmospheric pressure chemical vapor deposition using a simple mixture of iron acetylacetonate with a conventional photoresist and the effect of growth temperature from 550 to 950 {\deg}C on Fe…
We demonstrate that a single zone furnace with a modified synthesis chamber design is sufficient to obtain metal (Fe, Co or Ni) filled carbon nanotubes (CNT) with high filling efficiency and controlled morphology. Samples are formed by…
High-quality nitrogen-doped graphene on nickel is prepared by exploiting both the catalytic properties of nickel and the solubility of nitrogen atoms into its bulk. Following the standard chemical vapor deposition procedure, a previously…
A combinatorial thin-film synthesis approach combined with a high throughput analysis methodology was successfully applied to synthesize TiN/Ni coatings with optimum mechanical properties. The synthesis approach consists of the deposition…
Optimized growth of Single Wall Carbon Nanotubes requires a full knowledge of the actual state of the catalyst nanoparticle and its interface with the tube. Using Tight Binding based atomistic computer simulations, we calculate carbon…
Chemical vapor deposition synthesis of single-walled carbon nanotubes experiments, using Fe catalyst, and alternating methane and carbon monoxide as carbon feedstocks, lead to the reversible formation of junctions between tubes of different…
The surface reconstruction of the Fe catalyst films due to high temperature processing in hydrogen prior to nanotube nucleation and its effect on the growth morphologies of partially filled carbon nanotubes (CNTs) synthesized using…
A simple process for chemical vapor deposition of ultra SD single wall carbon nanotubes has been developed. In this process, an iron nitrate nonahydrate solution in isopropyl alcohol with a concentration of 400 ug/mlit was used to catalyze…
Three powder samples of Ni nanochains formed of polycrystalline Ni nanoparticles with an estimated diameter of about 30 nm have been synthesized by a wet chemical method using different organic surfactants. These samples, having…
We investigate the growth of the recently demonstrated composite material composed of vertically aligned carbon nanotubes capped by few graphene layers. We show that the carbon nanotubes grow epitaxially under the few graphene layers. By…
Carbon nanotubes have properties depending on the arrangement of carbon atoms on the tube walls, called chirality. Also it has been tried to grow nanotubes of only one chirality for more than a decade it is still not possible today. A…