相关论文: Pulsed Laser Deposition of Rocksalt Magnetic Binar…

Al-doped ZnO thin films were deposited using reactive high power impulse magnetron sputtering at substrate temperatures between room temperature and 600 $\bullet$ C. Two sample series with different oxygen partial pressures were studied.…

In the present study we report on properties of ZnCoO films grown at relatively low temperature by the Atomic Layer Deposition, using two reactive organic zinc precursors (dimethylzinc and diethylzinc). The use of these precursors allowed…

Biaxially textured LuNi2BC thin films with Tc up to 15.8 K and a residual resistivity ratio up to 15 have been prepared. The films were deposited on MgO(110) substrates using pulsed laser deposition from a stoichiometric target. Via the…

We report on the preparation and characterization of epitaxial thin films of the double-perovskite Sr$_2$CrWO$_6$ by Pulsed Laser Deposition (PLD). On substrates with low lattice mismatch like SrTiO$_3$, epitaxial Sr$_2$CrWO$_6$ films with…

As a novel and promising 2D material, bismuth oxyselenide (Bi$_2$O$_2$Se) has demonstrated significant potential to overcome existing technical barriers in various electronic device applications, due to its unique physical properties like…

We report on the structural, electrical and magnetic properties of ZnCoO thin films grown by Atomic Layer Deposition (ALD) method using reactive organic precursors of zinc and cobalt. As a zinc precursor we applied either dimethylzinc or…

Heteroepitaxial growth of BaSnO$_3$ (BSO) and Ba$_{1-x}$La$_x$SnO$_3$ (x = 7 %) (LBSO) thin films on different perovskite single crystal (SrTiO$_3$ (001) and SmScO$_3$ (110)) substrates has been achieved by Pulsed Laser Deposition (PLD)…

We report on the synthesis of high quality La$_{1/3}$Sr$_{2/3}$FeO$_3$ (LSFO) thin films using the pulsed laser deposition technique on both SrTiO$_3$ (STO) and LaAlO$_3$ (LAO) substrates (100)-oriented. From X-Ray diffraction (XRD)…

Al2O3 thin films have been deposited at substrate temperatures between 500{\deg}C to 600{\deg}C by reactive magnetron sputtering using an additional arbitrary substrate bias to tailor the energy distribution of the incident ions. The films…

The effects of growth rate (G_r), deposition temperature (T_d), film thickness (t_F), and substrate induced strain (epsilon) on morphological, crystallographic and magnetic characteristics of equiatomic CoPt epitaxial films synthesized with…

Bulk Scandium trifluoride ($\mathrm{ScF_3}$) is known for a pronounced negative thermal expansion (NTE) over a wide range of temperature, from $10~\mathrm{K}~\text{to}~ 1100~\mathrm{K}$. The structure of $\mathrm{ScF_3}$ can be described as…

Epitaxial LaRh1/2Mn1/2O3 thin films have been grown on (001)-oriented LaAlO3 and SrTiO3 substrates using pulsed laser deposition. The optimized thin film samples are semiconducting and ferromagnetic with a Curie temperature close to 100 K,…

We show that the quality of Nd1.85Ce0.15CuO4 films grown by pulsed laser deposition can be enhanced by using a non-stoichiometric target with extra copper added to suppress the formation of a parasitic (Nd, Ce)2O3 phase. The properties of…

Superconducting thin films of MgB2 were deposited by Pulsed Laser Deposition on magnesium oxide and sapphire substrates. Samples grown at 450C in an argon buffer pressure of about 10-2 mbar by using a magnesium enriched target resulted to…

Nano granular metallic iron (Fe) and titanium dioxide (TiO$_{2-\delta}$) were co-deposited on (100) lanthanum aluminate (LaAlO$_3$) substrates in a low oxygen chamber pressure using a pulsed laser ablation deposition (PLD) technique. The…

Thin films of the charge-ordered (CO) compound Pr$_{0.5}$Ca$_{0.5}$MnO$_{3}$ have been deposited onto (100)-oriented SrTiO$_{3}$ substrates using the Pulsed Laser Deposition technique. Magnetization and transport properties are measured…

Nanocomposite NiO:Au thin films, formed by gold nanoparticles embedded in a nickel oxide matrix, have been grown by reactive pulsed laser deposition (R-PLD). Two actively synchronized nanosecond laser sources, a KrF excimer laser (248 nm)…

The use of oxide materials in oxide electronics requires their controlled epitaxial growth. Recently, it was shown that Reflection High Energy Electron Diffraction (RHEED) allows to monitor the growth of oxide thin films even at high oxygen…

Pulsed laser deposition, a non-equilibrium thin-film growth technique, was used to stabilize metastable tetragonal iron sulfide (FeS), the bulk state of which is known as a superconductor with a critical temperature of 4 K. Comprehensive…

Recently, Bi2O2Se is discovered as a promising two-dimensional (2D) semiconductor for next generation electronics, due to its moderate bandgap size, high electron mobility and pronounced ambient stability. Meanwhile, it has been predicted…