相关论文: Pulsed Laser Deposition of Rocksalt Magnetic Binar…
We present a comprehensive study of the thickness dependence of static and magneto-dynamic magnetic properties of La$_{0.7}$Sr$_{0.3}$MnO$_3$. Epitaxial pulsed laser deposited La$_{0.7}$Sr$_{0.3}$MnO$_3$ / SrTiO$_3$(001) thin films in the…
Epitaxial La1.85Sr0.15CuO4/La2/3Ca1/3MnO3 superlattices on (001)-oriented LaSrAlO4 substrates have been grown with pulsed laser deposition technique. Their structural, magnetic and superconducting properties have been determined with…
This study presents a comprehensive investigation into the exceptional superconducting attributes of titanium nitride (TiN) achieved through plasma-enhanced atomic layer deposition (PEALD) on both planar and intricate three-dimensional (3D)…
We investigated the effects of annealing on LaMnO$_3$ epitaxial thin films grown by pulsed laser deposition and propose an efficient method of characterizing their stoichiometry. Structural, magnetic, and optical properties coherently…
We demonstrate the extensive study on how film density and crystallinity of molybdenum carbide ($MoC_{x}$) can be tailored during plasma-enhanced ALD (PEALD) by controlling either the plasma exposure time or the ion energy. We investigated…
Polycrystalline La$_{2/3}$Sr$_{1/3}$MnO$_{3}$ (LSMO) thin films were synthesized by pulsed laser ablation on single crystal (100) yttria-stabilized zirconia (YSZ) substrates to investigate the mechanism of magneto-transport in a granular…
Atomic layer deposition was used to synthesize niobium silicide (NbSi) films with a 1:1 stoichiometry, using NbF5 and Si2H6 as precursors. The growth mechanism at 200oC was examined by in-situ quartz crystal microbalance (QCM) and…
Control of structural domains in epitaxial thin films of functional materials is a fundamental technique to utilize their intrinsic physical and chemical properties in solid-state devices. In this study, we report on suppression of…
Bi4Ti3O12 (BIT) has been considered as material for UV detector since it has optical band gap of about 3.5 eV. Unlike the most used material for this purpose, such as GaN and AlN, BIT is a ferroelectric oxide material. It has shown good…
Nanostructured TiO2 thin films were prepared by pulsed laser deposition (PLD) on indium doped tin oxide (ITO) substrates. Results from X-ray photoelectron spectroscopy (XPS) show that Ti 2p core level peaks shift toward the lower binding…
Plasma enhanced atomic layer deposition was used to deposit thin films of Ga2O3 on to c-plane sapphire substrates using triethylgallium and O2 plasma. The influence of substrate temperature and plasma processing parameters on the resultant…
Alternate stacking of a highly conducting metallic layer with a magnetic triangular layer found in delafossite PdCrO2 provides an excellent platform for discovering intriguing correlated quantum phenomena. Thin film growth of the material…
We report on the chemical stability of La2/3Ca1/3MnO3 thin films. X-ray absorption spectroscopy at the Mn L-edge and O K-edge makes evident deviations from the nominally expected (2/3-1/3) Mn3+/Mn4+ ratio after the growth of thin films on…
By employing a mixed SnO$_2$+Sn source, we demonstrate suboxide molecular beam epitaxy growth of phase-pure single crystalline metastable SnO(001) thin films at a growth rate of ~1.0nm/min without the need for additional oxygen. These films…
Nanocomposite thin films of Zinc Oxide and Silicon were grown by co-evaporating powdered ZnO and Si. This resulted in nanocrystallites of ZnO being embedded in Silicon. The mismatch in crystal structures of constituent materials result in…
Recently, lattice dynamics of the highly strained europium monoxide, as a promising candidate for strong ferroelectric-ferromagnet material, applied in the next-generation storage devices, attracted huge attention in the solid-state…
Ruthenium dioxide (RuO$_2$) thin films were synthesized by Chemical Solution Deposition (CSD) on silicon substrates using only water and acetic acid as solvents. The microstructure, phase-purity, electrical and optical properties as well as…
Thin films of molybendum disulfide grown via thermal atomic layer deposition at low temperatures, suitable for temperature sensible substrates, can be amorphous. To avoid a high temperature post treatment of the whole sample, which can…
Nanocomposite thin films formed by gold nanoparticles embedded in a nickel oxide matrix have been synthesized by a new variation of the pulsed laser deposition technique. Two actively synchronized laser sources, a KrF excimer laser at 248…
Results on the chemical composition, structure and growth kinetics of titanium nitride (TiN) films deposited on mild steel substrates by pyrolytic laser-induced chemical vapour deposition (LCVD) are presented. Golden coloured lines of TiN…