相关论文: The initiation temperatures in nanothermite reacti…

In the present work, we systematically studied the effect of Al doping on the phase formation of iron nitride (Fe-N) thin films. Fe-N thin films with different concentration of Al (Al=0, 2, 3, 6, and 12 at.%) were deposited using dc…

Nanoparticle sintering remains a critical challenge in heterogeneous catalysis. In this work, we present a unified deep potential (DP) model for Cu nanoparticles on three Al$_2$O$_3$ surfaces ($\gamma$-Al$_2$O$_3$(100),…

Metallic contamination was key to the discovery of semiconductor nanowires, but today it stands in the way of their adoption by the semiconductor industry. This is because many of the metallic catalysts required for nanowire growth are not…

We report a study on the growth of NiBi3 nanowires and nanorods during the preparation of superconducting NiBi3 films by co-evaporation of Ni and Bi. We find that NiBi3 films grown via co-evaporation of Ni and Bi metals achieve higher…

Three different catalysts (Fe, Ni, Co nitrates dissolved in ethanol) were patterned on a SiO2/Si substrate and multi-wall carbon nanotubes were grown by catalytic decomposition of acetylene. We compare the growth of the carbon…

8~nm epsilon-Fe2O3 nanoparticles exhibit a spin reorientation transition that begins at 150 K which is a hallmark of this unique iron-oxide polymorph. We find that the change from the high to low temperature magnetic structures has been…

The heats of formation of haloacetylenes are evaluated using the recent W1 and W2 ab initio computational thermochemistry methods. These calculations involve CCSD and CCSD(T) coupled cluster methods, basis sets of up to spdfgh quality,…

Nanolaminated Al2O3/HfO2 thin films as well as single Al2O3 and HfO2 layers have been grown as gate dielectrics by Plasma Enhanced Atomic Layer Deposition (PEALD) technique on silicon carbide (4H-SiC) substrates. All the three dielectric…

Surface melting temperature is well-known significantly lower than the bulk melting point. But we find that the interior melting temperature in ultrathin nanowires is lower than that of the surface melting . The thermal stability of helical…

The temperature dependence of the thermal boundary resistivity is investigated in glass-embedded Ag particles of radius 4.5 nm, in the temperature range from 300 to 70 K, using all-optical time-resolved nanocalorimetry. The present results…

In the present investigation the pure elemental powder mixture of Al (70 at%) Ni (15 at %), Cu (15 at %) was mechanically milled in an attritor ball mill for 10, 20, 40, 60, 80 and 100 hours in hexane medium at 400 rpm. The isothermal…

The microscopic origin of the high Neel temperature (T_N) observed experimentally in SrTcO_3 has been examined using a combination of ab-initio electronic structure calculations and mean-field solutions of a multiband Hubbard model. The…

Al-doped ZnO thin films were deposited using reactive high power impulse magnetron sputtering at substrate temperatures between room temperature and 600 $\bullet$ C. Two sample series with different oxygen partial pressures were studied.…

Kinetic temperature is a fundamental parameter in molecular clouds. Symmetric top molecules, such as NH$_3$ and CH$_3$CCH, are often used as thermometers. However, at high temperatures, NH$_3$(2,2) can be collisionally excited to…

Monophasic and homogeneous Ni10Zr7 nanocrystalline alloy films were successfully grown at room temperature by co-sputtering in an indigenously developed three-gun DC/RF magnetron sputtering unit. The films could be produced with long-range…

Spray flame synthesis offers a promising method for scalable production of homogeneously mixed Y2O3-MgO nanopowders as next-generation infrared-transparent window material, which has attracted significant attention owing to its excellent…

Iron oxide nano particles with nominal Fe2O3 stoichiometry were synthesized by a wet, soft chemical method with the heat treatment temperatures from 250{\deg}C to 900{\deg}C in air. The variation in the structural properties of the nano…

A15 superconductors are distinguished by their high critical temperatures, magnetic fields, and current-carrying capabilities. Among them, Nb$_3$Al is of particular interest for superconducting quantum circuits as a means to extend device…

Inelastic electron tunneling and surface-enhanced optical spectroscopies at the molecular scale require cryogenic local temperatures even under illumination - conditions that are challenging to achieve with plasmonically resonant metallic…

We study the thermal effects on the nuclear matter (NM) properties such as binding energy, incompressibility, free symmetry energy and its coefficients using NL3, G3 and IU-FSU parameter sets of relativistic mean-field models. These models…