相关论文: The initiation temperatures in nanothermite reacti…

PCPDTBT nanostructures have been synthesized via template-assisted method and polymer-melt technique. The morphological, optical and structural properties of the PCPDTBT have been investigated. Melting polymer was used as a driving force to…

In this study we report the effect of sintering temperature on the low field magnetotransport properties of La_0.7Ca_0.3Mn_O3 manganite synthesized through polymeric precursor route. The La_0.7Ca_0.3MnO_3 has been sintered at 600^oC (S6),…

The synthesis of Si3N4 nanowires from the reaction of silicon nanoparticles with N2 in the 1200-1440 C temperature range is reported. The nitridation conditions are such that the reaction with nitrogen is favoured by the presence of silicon…

The different magnetic phases of the intermetallic compound Nd$_5$Ge$_3$ are studied in terms of the specific heat, in a broad range of temperatures (350~mK--140~K) and magnetic fields (up to 40 kOe). The expected $T^{3}$ and $T^{3/2}$…

The origin of a high Neel temperature in a 5$d$ oxide, NaOsO$_3$, has been analyzed within the mean-field limit of a multiband Hubbard model and compared with the analogous 4$d$ oxide, SrTcO$_3$. Our analysis shows that there are a lot of…

Temperature evolution of dielectric response, atomic structure, and lattice dynamics in thin film of sodium niobate in the epitaxial NaNbO$_3$/SrRuO$_3$/(001)MgO heterostructure is studied by dielectric measurements, x-ray diffraction, and…

In-situ transmission electron microscopy (TEM) studies reveal key insights into the structural and chemical evolution of nanoparticles (NPs) under external stimuli like heating and biasing, which is critical for evaluating their suitability…

We report on the thermoelectric properties of nickel doped Ag2-xNixTe (x = 0, 0.015, 0.025 & 0.055, 0.115, 0.155) nanostructures in the temperature (T) range of 5 K to 575 K. The electrical resistivity of Ag2Te nanostructure shows metallic…

In recent years, there has been a renewed interest in complex coacervation, driven by concerted efforts to offer novel experimental and theoretical insights into electrostatic charge-induced association. While previous studies have…

The effect of sintering temperatures (Ts) on the structural and magnetic properties of Ni0.6Zn0.4Fe2O4 (NZFO) ferrites synthesized by conventional double sintering method has been reported. The samples are sintered at 1200, 1250 and 1300…

We have measured magnetization M(T,H), electrical resistivity ro(T,H), thermal conductivity k(T,H), and thermopower S(T,H) of polycrystalline samples of Nd1-xEuxNiO3; 0 <= x <= 0.35; as a function of temperature and external magnetic field.…

Micron-scale metal-based composite powders are promising for energetic applications due to their tailored ignition and combustion properties. In particular, ball-milled Al/Zr composites exhibit lower ignition thresholds than pure aluminum,…

Al2O3 thin films have been deposited at substrate temperatures between 500{\deg}C to 600{\deg}C by reactive magnetron sputtering using an additional arbitrary substrate bias to tailor the energy distribution of the incident ions. The films…

In the present work, a thin film was deposited on quartz substrate by reactive RF magnetron sputtering of high purity (99.999%) aluminium target using ultra-high pure (Ar + N2) gas mixture. The percentage ratio of Ar and N2 in the gas…

Room-temperature ferromagnetism has been observed in the nanoparticles (7 - 30 nm dia) of nonmagnetic oxides such as CeO2, Al2O3, ZnO, In2O3 and SnO2. The saturated magnetic moments in CeO_2 and Al_2O_3 nanoparticles are comparable to those…

In the cooling concept by adiabatic melting, solid $^{4}$He is converted to liquid and mixed with $^{3}$He to produce cooling power directly in the liquid phase. This method overcomes the thermal boundary resistance that conventionally…

The dispersion stability and thermal conductivity of propylene glycol based nanofluids containing Al2O3 and TiO2 nanoparticles were studied in the temperature range of 20 to 80 {\deg}C. Nanofluids with different concentrations of…

The intermetallic compound Zr3Al is severely deformed by the method of repeated cold rolling. By X-ray diffraction it is shown that this leads to amorphization. TEM investigations reveal that a homogeneously distributed debris of very small…

The thermodynamical stability of ${\rm Al(BH_4)_3}$ has been investigated using first-principles calculations based on density functional theory. The heats of formation are obtained to be -132 and $-131 {\rm kJ/mol}$ without the zero-point…

We report the decomposition of La2-xSrxCuO4 into La2O3 and Cu nanoparticles in ultra-high vacuum, observed by in-situ heating experiments in a transmission electron microscope (TEM). The analysis of electron diffraction data reveals that…