相关论文: Mid-wave and Long-wave IR Linear Dichroism in a He…
Anisotropic photonic materials with linear dichroism are crucial components in many sensing, imaging and communication applications. Such materials play an important role as polarizers, filters and wave-plates in photonic devices and…
Polarimetric infrared detection bolsters IR thermography by leveraging the polarization of light. Optical anisotropy, i.e., birefringence and dichroism, can be leveraged to achieve polarimetric detection. Recently, giant optical anisotropy…
We report the synthesis and characterization of a novel class of ionic semiconductor materials- inorganic chalcogenide perovskites. Several different compounds including BaZrS3, CaZrS3, SrTiS3 and SrZrS3 were synthesized by high temperature…
Thermoelectric materials can be designed to support optical resonances across multiple spectral ranges to enable ultra-wide band photodetection. For instance, antimony telluride (Sb2Te3) chalcogenide exhibits interband plasmonic resonances…
Lithium thioindate (LiInS$_{2}$) is a new nonlinear chalcogenide biaxial material transparent from 0.4 to 12 $\mu$m, that has been successfully grown in large sizes and good optical quality. We report on new physical properties that are…
In the present study, the structural, electronic, optical and thermoelectric properties of two isostructural chalcogenide materials, NaInS2 and NaInSe2 with hexagonal symmetry (R-3m) have been studied using the first principles method. A…
The crystal structures of the Sr1-xCaxRuO3 perovskites are investigated using both long range and local structural probes. High resolution synchrotron powder X-ray diffraction characterization at ambient temperature shows that the materials…
Topological insulators generally have dielectric bulk and conductive surface states. Consequently, some of these materials have been shown to support polaritonic modes at visible and THz frequencies. At the same time, the optical properties…
The application of ultrathin two-dimensional (2D) perovskites in near-infrared and visible-range optoelectronics has been limited owing to their inherent wide bandgaps, large excitonic binding energies and low optical absorption at higher…
The mid-infrared (mid-IR) is a strategically important band for numerous applications ranging from night vision to biochemical sensing. Unlike visible or near-infrared optical parts which are commonplace and economically available…
Design of a mid-wave IR broadband (3.1 - 3.8 {\mu}m) fiber-based light source exploiting FWM in a meter long suitably designed chalcogenide microstructured fiber is reported. An achievable gain more than 35 dB is demonstrated.
High-index dielectric materials are in great demand for nanophotonic devices and applications, from ultrathin optical elements to metal-free sub-diffraction light confinement and waveguiding. Here we show that chalcogenide topological…
Organic-inorganic halide perovskites are intrinsically unstable when exposed to moisture and/or light. Additionally, the presence of lead in many perovskites raises toxicity concerns. Herein is reported a thin film of BaZrS3, a lead-free…
A long-wavelength infrared (IR) photodetector based on two-dimensional materials working at room temperature would have wide applications in many aspects in remote sensing, thermal imaging, biomedical optics, and medical imaging. However,…
The development of compact and fieldable mid-infrared (mid-IR) spectroscopy devices represents a critical challenge for distributed sensing with applications from gas leak detection to environmental monitoring. Recent work has focused on…
The high brightness, broad spectral coverage and pulsed characteristics of infrared synchrotron radiation enable time-resolved spectroscopy under throughput-limited optical systems, as can occur with the high-field magnet cryostat systems…
TiS3 nanosheets have proven to be promising candidates for ultrathin optoelectronic devices due to their direct narrow band-gap and the strong light-matter interaction. In addition, the marked in-plane anisotropy of TiS3 is appealing for…
Light sources and photodetectors operating in the far- to mid-infrared (FIR/MIR) band ($8$-$12~\rm \mu m$, $0.1$-$0.15~\rm eV$) remain relatively poorly developed compared to their counterparts operating in the visible and near-infrared…
Mid-wave infrared (MWIR) frequency comb is expected to dramatically improve the precision and sensitivity of molecular spectroscopy. For high resolution application, high speed MWIR photodetector is one of the key components, however, the…
Observations at mid-infrared (4.8-17.65 um) and radio (0.7-1.3 cm) wavelengths are used to constrain the structure of the high-mass star-forming region W3 IRS5 on 0.1'' (200 AU) scales. Two bright mid-infrared sources are detected, as well…