相关论文: Capillary nanostamping with spongy mesoporous sili…

Patterned substrates for optics, electronics, sensing, lab-on-chip technologies, bioanalytics, clinical diagnostics as well as translational and personalized medicine are typically prepared by additive substrate manufacturing including…

Polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) monoliths containing regular arrays of macropores (diameter ~1.1 microns, depth ~700 nm) at their surfaces are used to pattern substrates by patterning modes going beyond the functionality…

Integration of solvothermal reaction products into complex thin-layer architectures is frequently achieved by combinations of layer transfer and subtractive lithography, whereas direct additive substrate patterning with solvothermal…

Classical contact lithography involves patterning of surfaces by embossing or by transfer of ink. We report direct lithographic transfer of parts of sacrificial stamps onto counterpart surfaces. Using sacrificial stamps consisting of the…

We report an optimized two-step thermopolymerization process carried out in contact with micropatterned molds that yields porous phenolic resin dual-use stamps with topographically micropatterned contact surfaces. With these stamps, two…

Nanoparticle monolayer sheets are ultrathin inorganic-organic hybrid materials that combine highly controllable optical and electrical properties with mechanical flexibility and remarkable strength. Like other thin sheets, their low bending…

Additive manufacturing at the micro- and nanoscale has seen a recent upsurge to suit the increasing demand for more elaborate structures. However, the integration and precise placement of multiple distinct materials at small scales remain a…

Colloidal lithography [1] is how patterns are reproduced in a variety of natural systems and is used more and more as an efficient fabrication tool in bio-, opto-, and nano-technology. Nanoparticles in the colloid are made to form a mask on…

Insect-inspired capillary submicron stamping and subsequent surface-limited metal-assisted chemical etching (MACE) with ammonium bifluoride as HF source is employed for high-throughput production of ordered topographically patterned silicon…

We demonstrate three-dimensional (3-D) nanoimprint lithography using master samples initially structured by two-photon lithography. Complex geometries like micro prisms, micro parabolic concentrators, micro lenses and other micrometer sized…

Understanding and engineering the self-assembly of soft colloidal particles (microgels) at liquid-liquid interfaces is broadening their use in colloidal lithography. Here, we present a new route to assemble rectangular lattices of microgels…

Capillary forces guide the motion of biomolecular condensates, water-borne insects, and breakfast cereal. These surface-mediated interactions can be harnessed to build units into materials with exotic properties deriving from mesoscale…

It is shown that porous spherical particles can be obtained via the freezing of silica nanoparticle aqueous suspensions emulsified in a continuous oil phase. After two freeze-thaw cycles, nanoparticles turn aggregated into flocculated…

Hypothesis: Sample-spanning particle networks are used to induce structure and a yield stress, necessary for 3D printing of porous ceramics and paints. In capillary suspensions, a small quantity of immiscible secondary fluid is incorporated…

Colloidal lithography has emerged as a promising alternative to conventional nanofabrication techniques, offering the ability to create nanoscale patterns in a cost-effective and scalable manner. However, it has been so far limited by…

The orientation of the lamellae formed by the phase separation of symmetric diblock copolymer thin films is strongly affected by the wetting properties of the polymer blocks with respect to the substrate. On bare silicon wafers the lamellae…

Hydrophobic inorganic films were obtained by direct deposition of copper or silicon onto natural lotus leaves by ion beam sputtering deposition technique. Scanning electron microscopy observations showed a lotus-leaf-like surface structure…

Silicon nanowires are prepared by the method of the two-step metal-assisted wet chemical etching. We have analyzed the structure of solid, rough and porous nanowire surfaces of boron-doped silicon substrates with resistivities of \rho >…

We use hexagonal mesophases made of oil-swollen surfactant-stabilized tubes arranged on a triangular lattice in water and doped with metallic salts as templates for the radiolytic synthesis of nanostructures. The nanostructures formed in…

We demonstrate facile optical manipulation of shape of birefringent colloidal microparticles made from liquid crystal elastomers. Using soft lithography and polymerization, we fabricate elastomeric microcylinders with weakly undulating…