相关论文: Structural ordering of laser-processed FePdCu thin…

The A1- L10 phase transformation has been investigated in (001) FeCuPt thin films prepared by atomic-scale multilayer sputtering and rapid thermal annealing (RTA). Traditional x-ray diffraction is not always applicable in generating a true…

We report the evolution of crystallographic structure, magnetic ordering and electronic transport in thin films of full-Heusler alloy Co$_2$MnSi deposited on (001) MgO with annealing temperatures ($T_A$). By increasing the $T_A$ from…

We deposited Ag_2O films in PLD system on glass substrate for a fixed partial oxygen gas pressure (70 mili Torr) with the variation of laser energy from 75 to 215 mJ/Pulse. The XRD patterns confirm that the films have well crystallinity and…

We report on the formation of the dilute $Pd_{1-x}Fe_x$ compositions with tunable magnetic properties under an ion-beam implantation of epitaxial Pd thin films. Binary $Pd_{1-x}Fe_x$ alloys with a mean iron content $x$ of $0.025$, $0.035$…

We report on the production of ordered assemblies of silicon nanostructures by means of irradiation of a Si(100) substrate with 1.2 keV Ar ions at normal incidence. Atomic Force and High-Resolution Transmission Electron microscopies show…

Severe plastic deformation using high-pressure torsion of ternary Cu-based materials (CuFeCo and CuFeNi) was used to fabricate bulk samples with a nanocrystalline microstructure. The goal was to produce materials featuring the granular…

A moderately intense $450$ fs laser pulse is used to create rotational wave packets in gas phase $\rm{I_2}$ molecules. The ensuing time-dependent alignment, measured by Coulomb explosion imaging with a delayed probe pulse, exhibits the…

X-ray diffraction experiments were performed on polycrystalline and single-crystal specimens of Ce$_{2}$Fe$_{17}$ at temperatures between 10 K and 300 K. Below $T_{\mathrm{t}}$ = 118$\pm$2 K, additional weak superstructure reflections were…

We report the successful fabrication of superconducting tantalum nitride (TaN) thin films using a pulsed laser deposition technique with 1064 nm radiation. Films with thickness $ \sim $ 100 nm deposited on MgO (100) single crystals and on…

CoFe2O4 thin films (5 nm and 20 nm thick) were grown by oxygen assisted molecular beam epitaxy on Pt(111) at 523~K and subsequently annealed at 773 K in vacuum or oxygen. They were characterized in-situ using Auger Electron Spectroscopy,…

Laser annealing offers a promising route to back end of the line fabrication of ferroelectric thin film transistors based on hafnium-zirconium oxide (HZO). Due to the wide band gap of this material, previous reports have studied the…

The discovery of ferromagnetism in two-dimensional (2D) monolayers has stimulated growing research interest in both spintronics and material science. However, these 2D ferromagnetic layers are mainly prepared through an incompatible…

We have investigated the magnetodynamic properties of $\text{La}_{0.7}\text{Sr}_{0.3}\text{MnO}_3$ (LSMO) films of thickness 10, 15 and 30 nm grown on (111)-oriented SrTi$\text{O}_3$ (STO) substrates by pulsed laser deposition.…

Low resistivity (~3-24 mOhm.cm) with tunable n- and p-type phase pure Cu2O thin films have been grown by pulsed laser deposition at 25-200 0C by varying the background oxygen partial pressure (O2pp). Capacitance data obtained by…

We present a comprehensive study of the thickness dependence of static and magneto-dynamic magnetic properties of La$_{0.7}$Sr$_{0.3}$MnO$_3$. Epitaxial pulsed laser deposited La$_{0.7}$Sr$_{0.3}$MnO$_3$ / SrTiO$_3$(001) thin films in the…

Irradiation-induced ductility loss is a major concern facing structural steels in next-generation nuclear reactors. Currently, the mechanisms for this are unclear but crucial to address for the design of reactor components. Here, the…

The growth mode, magnetic and magneto-optical properties of epitaxial Au/Co/Au(111) ultrathin trilayers grown by pulsed-laser deposition (PLD) under ultra-high vacuum are presented. Sapphire wafers buffered with a single-crystalline Mo(110)…

We present a systematic study of the magnetic properties of semiconducting ZnFe$_2$O$_4$ thin films fabricated by pulsed laser deposition at low and high oxygen partial pressure and annealed in oxygen and argon atmosphere, respectively. The…

Ultrashort pulsed laser annealing is an efficient technique for crystallizing amorphous semiconductors with the possibility to obtain polycrystalline films at low temperatures, below the melting point, through non-thermal processes. Here, a…

Herein, we report CeIrIn5 thin-film growth on a MgF2 (001) substrate using pulsed laser deposition technique. X-ray diffraction analysis showed that the thin films were either mainly a-axis-oriented (TF1) or a combination of a- and…