相关论文: Structural ordering of laser-processed FePdCu thin…

The irradiation with the 10 ns pulsed infrared Nd:YAG laser was applied to transform FePdCu multilayers into chemically ordered L10 phase. The X-ray diffraction methods (Theta/2Theta scan, psi-scan, omega-scan) were used to trace the…

FePd thin films have been recently considered as promising material for high-density magnetic storage devices. However, it is necessary to find a proper method of fabrication for the (001)-textured and chemically well-ordered alloy. In this…

Ordered FePdCu nanoisland arrays were formed by annealing at 600oC, which caused solid state dewetting of [Cu/Fe/Pd] multilayers deposited on self-assembled SiO2 nanospheres with size of 100 nm. A single FePdCu island was formed on the top…

A FePd alloy was nanostructured by severe plastic deformation following two different routes: ordered and disordered states were processed by high pressure torsion (HPT). A grain size in a range of 50 to 150 nm is obtained in both cases.…

Nanostructured Pd-Fe thin films with varied Fe content were prepared by electrodeposition technique from organic electrolytes on Cu and brass substrates. The structure and the magnetic properties of the films were investigated prior to…

A series of Co_xCu_{100-x} (x = 0, 40...75, 100) layers with thicknesses in-between 13 nm and 55 nm were prepared on silicon substrates using cross-beam pulsed laser deposition. Wide-angle X-ray diffraction (WAXRD), transmission electron…

The continuous need towards improving the capacity of magnetic storage devices requires materials with strong perpendicular magnetic anisotropy. FePd, CoPd and their Co(Fe)Pt counterparts very attractive candidate for such purposes. The…

Understanding of material behaviour at nanoscale under intense laser excitation is becoming critical for future application of nanotechnologies. Nanograting formation by linearly polarised ultra-short laser pulses has been studied…

We show that the quality of Nd1.85Ce0.15CuO4 films grown by pulsed laser deposition can be enhanced by using a non-stoichiometric target with extra copper added to suppress the formation of a parasitic (Nd, Ce)2O3 phase. The properties of…

(00l)-Oriented LiNbO3 ultra-thin film was fabricated on Pt/Ti/SiO2/Si substrate using pulsed laser deposition. The film shrunk into crystalline state nanoparticles that still kept (00l) preferential orientation as being annealed in the…

Epitaxial LaRh1/2Mn1/2O3 thin films have been grown on (001)-oriented LaAlO3 and SrTiO3 substrates using pulsed laser deposition. The optimized thin film samples are semiconducting and ferromagnetic with a Curie temperature close to 100 K,…

The ordered structure of binary alloy nanoparticles determines their magnetic and catalytic characteristics. In the alloys after annealing, one of the components preferentially segregates on the surface to reduce surface energy. This…

We have observed nanopattern formation with robust and controllable spatial ordering by laser-induced dewetting in nanoscopic metal films. Pattern evolution in Co film of thickness 1\leq h\leq8 nm on SiO_{2} was achieved under multiple…

We have investigated the electronic and magnetic properties of perovskite SrRu1-xIrxO3 thin films grown by pulsed laser deposition on atomically-flat (001) SrTiO3 substrates. SrRuO3 has the properties of a ferromagnetic metal with Curie…

We report the successful growth of highly textured thin films of (Fe,Ni)5GeTe2 two-dimensional ferromagnet on c-plane sapphire using pulsed laser deposition. Structural characterization via X-ray diffraction confirms preferential…

Hydrodynamic pattern formation (PF) and dewetting resulting from pulsed laser induced melting of nanoscopic metal films have been used to create spatially ordered metal nanoparticle arrays with monomodal size distribution on…

We have achieved (001) oriented L10 (Fe1-xCux)55Pt45 thin films, with magnetic anisotropy up to 3.6x10^7 erg/cm^3, using atomic-scale multilayer sputtering and post annealing at 400 {\deg}C for 10 seconds. By fixing the Pt concentration,…

We report on the ultrafast dynamics of magnetic order in a single crystal of CuO at a temperature of 207 K in response to strong optical excitation using femtosecond resonant x-ray diffraction. In the experiment, a femtosecond laser pulse…

We report pulsed laser deposition synthesis and characterization of polycrystalline Fe1-xCox Si thin films on Si (111). X-ray diffraction, transmission electron, and atomic force microscopies reveal films to be dense, very smooth, and…

We have grown Au/Ag modulated nanostructured thin films by pulsed laser deposition using metallic targets. The growths performed at room temperature involved deposition of alternate layers of the two metals with larger thickness of Au and…