相关论文: Sub-Nyquist Channel Estimation over IEEE 802.11ad …

Reuse-1 systems operating in the sub-1 GHz UHF band are limited by substantial co-channel interference (CCI). In such orthogonal frequency division multiple access (OFDMA) cellular systems, the inter-sector or inter-tower interference (ITI)…

In vehicular communications, reliable channel estimation is critical for the system performance due to the doubly-dispersive nature of vehicular channels. IEEE 802.11p standard allocates insufficient pilots for accurate channel tracking.…

This paper presents the realization of a wireless Gigabit Ethernet communication system operating in the 60 GHz band. The system architecture uses a single carrier modulation. A differential encoded binary phase shift keying modulation and…

This paper tackles the challenge of wideband MIMO channel estimation within indoor millimeter-wave scenarios. Our proposed approach exploits the integrated sensing and communication paradigm, where sensing information aids in channel…

The millimeter-wave (mmWave) technology, recently standardized by IEEE 802.11ad, is emerging as an attractive alternative to the traditional 2.4/5GHz wireless systems, promising multi-Gigabit wireless throughput. However, the high…

This paper documents a simple parametric polynomial line-of-sight channel model for 100-450 GHz band. The band comprises two popular beyond fifth generation (B5G) frequency bands, namely, the D band (110-170 GHz) and the low-THz band…

Last years we have witnessed the uprising of location based applications, which depend on the devices ability to accurately obtain their position. IEEE 802.11, foretelling the need for such applications, started the IEEE 802.11az work on…

Millimeter-wave (mmw) frequency bands, especially 60 GHz unlicensed band, are considered as a promising solution for gigabit short range wireless communication systems. IEEE standard 802.11ad, also known as WiGig, is standardized for the…

In traditional spread-spectrum techniques, a wideband transmit signal is obtained by modulating a wideband carrier by a narrowband signal containing a relatively low-rate message. In the receiver, the respective demodulation/despreading…

Low-bandwidth communication, such as underwater acoustic communication, is limited by best-case data rates of 30--50 kbit/s. This renders such channels unusable or inefficient at best for single image, video, or other bandwidth-demanding…

Oversampling combined with low quantization resolutions has been shown to be a viable option when aiming for energy efficiency in multigigabit/s communications systems. This work considers the case of 1-bit quantization combined with…

As 6G research advances, the growing demand leads to the emergence of novel technologies such as integrated sensing and communication (ISAC), new antenna arrays like extremely large MIMO (XL-MIMO) and reconfigurable intelligent surfaces…

Rydberg-atom receivers aim for ultra-high sensitivity to microwave fields through various techniques, but receiving satellite signals has remained a significant challenge, due to the difficulty of capturing weak microwaves over long…

IEEE 802.11ay defines new PHY and MAC specifications that enable 100 Gbps communications in the 60 GHz millimeter-wave (mmWave) band. Among the various use cases supported by IEEE 802.11ay, fixed wireless access, a cost-efficient…

We introduce a new technique for narrow-band (NB) signal classification in sparsely populated wide-band (WB) spectrum using supervised learning approach. For WB spectrum acquisition, Nyquist rate sampling is required at the receiver's…

We develop a framework that we call compressive rate estimation. We assume that the composite channel gain matrix (i.e. the matrix of all channel gains between all network nodes) is compressible which means it can be approximated by a…

As an alternative to the traditional sampling theory, compressed sensing allows acquiring much smaller amount of data, still estimating the spectra of frequency-sparse signals accurately. However, compressed sensing usually requires random…

This paper presents the study and the realization of a hybrid 60 GHz wireless communications system. As the 60 GHz radio link operates only in a single-room configuration, an additional Radio over Fibre (RoF) link is used to ensure the…

Millimeter wave is a promising technology for the next generation of wireless systems. As it is well-known for its high path loss, the systems working in this spectrum tend to exploit the shorter wavelength to equip the transceivers with a…

For systems and devices, such as cognitive radio and networks, that need to be aware of available frequency bands, spectrum sensing has an important role. A major challenge in this area is the requirement of a high sampling rate in the…