相关论文: Impact of micro-alloying on the plasticity of Pd-b…
Bartsch et al. [A. Bartsch, K. Raetzke, A. Meyer, and F. Faupel, Phys. Rev. Lett. 104, 195901 (2010)] reported measurements of the diffusivities of different components of the multi-component bulk metallic glass Pd43Cu27Ni10P20. The…
The mechanical properties of polycrystalline metals are governed by the interaction of defects that are generated by deformation within the 3D microstructure. In materials that deform by slip, the plasticity is usually highly heterogeneous…
Digital image correlation of laser-ablated platinum nanoparticles on the surface of a polycrystalline metal (nickel-based superalloy Rene 88DT) was used to obtain the local strain behavior from an in situ scanning electron microscope…
A complex study of aging kinetics for both coarse-grained and nanostructured by severe plastic deformation Cu -- 2 wt% Be alloy is reported. It is shown that aging of a coarse-grained alloy leads to continuous formation of nanosized CuBe…
The article focuses on the effect of alloying and microstructure on formability of advanced high strength steels (AHSSs) processed via quenching and partitioning (Q&P). Three different Q&P steels with different combination of alloying…
A filamentary composite elaborated by cold drawing was processed by High Pressure Torsion (HPT). The nanostructure resulting from this severe plastic deformation (SPD) was investigated thanks to scanning electron microscopy, transmission…
Although Poisson's ratio, v, is a quantity of great importance in materials design, presently, very few methods are available to measure it at small (micrometre) scales and those typically involve intensive geometric refinement of the…
Recent investigations of the dynamic compressive strength of cold isostatically pressed composites of polytetrafluoroethylene (PTFE), tungsten (W) and aluminum (Al) powders show significant differences depending on the size of metallic…
We present a high-throughput nanoindentation study of in-situ bending effects on incipient plastic deformation behavior of polycrystalline and single-crystalline pure aluminum and pure copper at ultra-nano depths (<200nm). We find that…
The nature of low-impurity ferromagnetism remains a challenging problem in the solid-state community due to the strong dependence of magnetic properties on composition, concentration, and structural geometry of diluted alloys. To address…
The decomposition process mechanisms have been investigated in a Fe50Au25Pd25 (at.%) alloy processed by severe plastic deformation. Phases were characterized by X-ray diffraction and microstructures were observed using transmission electron…
A large body of literature within the additive manufacturing (AM) community has focused on successfully creating stable tungsten (W) microstructures due to significant interest in its application for extreme environments. However,…
We study the elastic response of composites of rods embedded in elastic media. We calculate the micro-mechanical response functions, and bulk elastic constants as functions of rod density. We find two fixed points for Poisson's ratio with…
Minor alloying is widely used to control mechanical properties of metallic glasses (MGs). The present understanding of how a small amount of alloying element changes strength is that the additions lead to more efficient packing of atoms and…
An empirical potential that has been widely used to perform molecular dynamics studies on the fracture behavior of FeP metallic glasses is shown to exhibit spinodal decomposition in the composition range commonly studied. The phosphorous…
The mechanical behavior of two nanocrystalline Al alloys, Al-Mg-Y and Al-Fe-Y, is investigated with in-situ micropillar compression testing. Both alloys were strengthened by a hierarchical microstructure including grain boundary…
Crystal plasticity finite element simulations are frequently employed to predict the plastic anisotropy of polycrystalline metals based on their crystallographic texture. In age-hardenable aluminium alloys, however, the texture-induced…
In this work, we studied the effect of Si on the microstructure and tensile properties of the as-cast Al-5.0Cu-0.6Mn-1.2Fe alloys which were produced by casting with or without applied pressure. The results show that the addition of Si can…
The extreme miniaturization in modern technology calls for deeper insights into the non-conventional, fluctuation dominated mechanics of materials at micro- to nano-scales. Both experiments and simulations show that sub-micron…
When stressed sufficiently, solid materials yield and deform plastically via reorganization of microscopic constituents. Indeed, it is possible to alter the micro-structure of materials by judicious application of stress, an empirical pro-…