相关论文: Impact of micro-alloying on the plasticity of Pd-b…
Additive manufacturing (AM) of metallic components promises many advantages over conventional manufacturing processes through high design flexibility across multiple length scales and precision coupled with an astonishing combination of…
Nd$_{2}$Fe$_{14}$B -- a widely used permanent magnet -- has magnetocrystalline anisotropy constants that differ between the bulk and interface regions. This study explores the effects of lattice distortion on the magnetocrystalline…
The Poisson's ratio of a material characterizes its response to uniaxial strain. Materials normally possess a positive Poisson's ratio - they contract laterally when stretched, and expand laterally when compressed. A negative Poisson's…
Prior to macroscopic yielding, most materials undergo a regime of plastic activity that cannot be resolved in conventional bulk deformation experiments. In this pre-yield, or micro-plastic regime, it is the initial three dimensional defect…
We conducted an inter-laboratory study of a metallic glass whose main component is nickel. Two determinations of the mass fractions of the different elements present within the sample were asked to the participants: one at an acceleration…
We present an investigation of the role of micropatterning on adhesion properties at soft deformable polydimethylsiloxane (PDMS)/ acrylic adhesive interfaces. Contrary to what has been observed for low aspect ratio rigid patterns, where the…
The glass transition remains unclarified in condensed matter physics. Investigating the mechanical properties of glass is challenging because any global deformation that may result in shear rejuvenation requires an astronomical relaxation…
Molybdenum disilicide (MoSi$_2$) is a very promising material for high temperature structural applications due to its high melting point (2030 {\deg}C), low density, high thermal conductivity and good oxidation resistance. However, MoSi$_2$…
The work describes a numerical method to study the nature of compressive failure of porous ceramics in relation to its volume fraction. The microstructure of an alumina-based foam material manufactured by mechanical stirring of a slurry is…
Synchrotron Laue microdiffraction and Digital Image Correlation measurements were coupled to track the elastic strain field (or stress field) and the total strain field near a general grain boundary in a bent bicrystal. A 316L stainless…
LSCF is a promising candidate for the cathode in SOFCs. Understanding the microstructural characteristics is crucial to its application because they predominately determine the performance and durability of the porous cathodes and hence of…
The presence of macrozones (or micro-textured regions) in Ti-6Al-4V (Ti64) was shown to be a potential cause to the onset of cold dwell fatigue which reduces fatigue life significantly. Past research has demonstrated the potential of using…
The influence on macroscopic work hardening of small, spherical, elastic particles dispersed within a matrix is studied using an isotropic strain gradient plasticity framework. An analytical solution, based on a recently developed yield…
Nanodot deposition on a side surface of a rectangular sample and digital image correlation are used to quantify the in-plane strain fields associated with the propagation of a shear band in a PdNiP bulk metallic glass,induced by rolling.…
Twenty-one distinct AlxCoCrFeNi alloys were rapidly prepared by laser alloying an equiatomic CoCrFeNi substrate with Al powder to create an alloy library ranging x=0.15-1.32. Variations in crystal structure, microstructure and mechanical…
Severe plastic deformation using high-pressure torsion of ternary Cu-based materials (CuFeCo and CuFeNi) was used to fabricate bulk samples with a nanocrystalline microstructure. The goal was to produce materials featuring the granular…
Based on a hopping model we show how the mixed alkali effect in glasses can be understood if only a small fraction c_V ofthe available sites for the mobile ions is vacant. In particular, we reproduce the peculiar behavior of the internal…
A FePd alloy was nanostructured by severe plastic deformation following two different routes: ordered and disordered states were processed by high pressure torsion (HPT). A grain size in a range of 50 to 150 nm is obtained in both cases.…
Controlled plastic forming of nanoscale metallic objects by applying mechanical load is a challenge, since defect-free nanocrystals usually yield at near theoretical shear strength, followed by an uncontrolled catastrophic failure. Herein,…
Many emerging applications in microscale engineering rely on the fabrication of three-dimensional architectures in inorganic materials. Small-scale additive manufacturing (AM) aspires to provide flexible and facile access to these…