相关论文: Development of high-performance iron-based superco…

This study presents a comprehensive investigation into the exceptional superconducting attributes of titanium nitride (TiN) achieved through plasma-enhanced atomic layer deposition (PEALD) on both planar and intricate three-dimensional (3D)…

Continuous Nb wires, 7-15 nm in diameter, have been fabricated by sputter-coating single fluorinated carbon nanotubes. Transmission electron microscopy revealed that the wires are polycrystalline, having grain sizes of about 5 nm. The…

High transition temperature (high-Tc) superconductivity is associated with layered crystal structures. This work considers superconductivity in ultra-thin crystals (of thickness equal to the transverse structural periodicity distance d for…

We propose a targeted attack on making the Fe-based superconductor (FBS) AEFe2As2 (122) (AE = alkaline earth, here Ba or Sr) into a much cheaper, higher stability margin, round, twisted and effectively isotropic multifilament conductor…

Using the newly developed real space vortex-lattice based theory of superconductivity, we study the maximum superconducting transition temperature (T_{c}^{\max}) in the iron-based superconductors. We find that all the reported FeAs…

We report a novel method of growing strongly-disordered superconducting titanium nitride (TiN) thin films by reactive electron-beam deposition. The normal state sheet resistance and superconducting critical temperature (Tc) can be tuned by…

High critical current densities (Jc) > 1 MA/cm2 were realized in cobalt-doped BaFe2As2 (BaFe2As2:Co) films on flexible metal substrates with biaxially-textured MgO base-layers fabricated by an ion-beam assisted deposition technique. The…

The surprising discovery of superconductivity in layered iron-based materials, with transition temperatures climbing as high as 55 K, has lead to thousands of publications on this subject over the past two years. While there is general…

In this letter we demonstrate the development of ternary Nb3Sn multifilamentary conductors with artificial pinning centers (APC) which achieve high critical fields. These recently-developed conductors were tested in a 31 T magnet, and the…

Transport critical current (Ic) was measured for MgB2/Fe round wires, with magnetic field oriented perpendicular to the wire and parallel to it. Measurements were made on a wire with pure MgB2 core and another wire where MgB2 core was doped…

Inductance of superconducting thin-film inductors and structures with linewidth down to 250 nm has been experimentally evaluated. The inductors include various striplines and microstrips, their 90-degree bends and meanders, interlayer vias,…

High engineering critical current density JE of >500 A/mm2 at 20 T and 4.2 K can be regularly achieved in Ag-sheathed multifilamentary Bi2Sr2CaCu2Ox (Bi-2212) round wire when the sample length is several centimeters. However, JE(20 T) in…

Cu-stabilized 18-filament MgB2 tapes with NbZr buffer have been fabricated by using powder-in-tube technique. The phase composition and microstructure were examined by X-ray diffraction and optical microscopy. Transport critical current…

Superconductivity has been found in RuN films obtained by reactive magnetron sputtering. This is a novel member of the metal nitride superconductors family. The critical temperature of the superconducting transition varies depending on the…

A review of current developments in the study of chemical doping effect on the superconducting properties of MgB2 wires and tapes is presented, based on the known literature data and our own results. The critical current density of MgB2 can…

The estimation of the critical current ($I_c$) and AC losses of high-temperature superconductor (HTS) devices through modeling and simulation requires the knowledge of the critical current density ($J_c$) of the superconducting material.…

Highly dense nanocrystalline MgB_2 bulk superconductors with distinctly improved pinning were prepared by mechanical alloying of Mg and B powders and hot compaction at ambient temperatures. The nanocrystalline samples reveal high critical…

We report on the thickness dependence of the superconducting characteristics including critical current Ic, critical current density Jc, transition temperature Tc, irreversibility field Hirr, bulk pinning force plot Fp(H), and the normal…

We have developed a new experimental setup specifically designed for measuring thermal conductivity on technical superconductors in the range of temperatures from 3 to 330 K in magnetic fields up to 21 T. Three Nb3Sn wires, produced by the…

Highly textured NdFeAs(O,F) thin films have been grown on ion beam assisted deposition (IBAD)-MgO/Y2O3/Hastelloy substrates by molecular beam epitaxy. The oxypnictide coated conductors showed a superconducting transition temperature (Tc) of…