相关论文: Preferentially orientated E-beam TiN thin films us…

We report a novel method of growing strongly-disordered superconducting titanium nitride (TiN) thin films by reactive electron-beam deposition. The normal state sheet resistance and superconducting critical temperature (Tc) can be tuned by…

(00l)-Oriented LiNbO3 ultra-thin film was fabricated on Pt/Ti/SiO2/Si substrate using pulsed laser deposition. The film shrunk into crystalline state nanoparticles that still kept (00l) preferential orientation as being annealed in the…

We report the successful fabrication of superconducting tantalum nitride (TaN) thin films using a pulsed laser deposition technique with 1064 nm radiation. Films with thickness $ \sim $ 100 nm deposited on MgO (100) single crystals and on…

Titanium nitride (TiN) is a paradigm of refractory transition metal nitrides with great potential in vast applications. Generally, the plasmonic performance of TiN can be tuned by oxidation, which was thought to be only temperature-, oxygen…

This study aims towards a systematic reciprocity of the tunable synthesis parameters - partial pressure of N$_2$ gas, ion energy (\Ei) and Ti interface in TiN thin film samples deposited using ion beam sputtering at ambient temperature…

This study presents a comprehensive investigation into the exceptional superconducting attributes of titanium nitride (TiN) achieved through plasma-enhanced atomic layer deposition (PEALD) on both planar and intricate three-dimensional (3D)…

Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. In…

This work reports a pulsed laser-assisted synthesis, detailed structural characterization, and study of plasmonic properties of three sets of TiN/TiNO thin films with high electron density. The first two sets of TiN films were grown at 600C…

TaN thin film is an attractive interlayer as well as a diffusion barrier layer in [FeN/TaN](n) multilayers for the application as potential write-head materials in high-density magnetic recording. We synthesized two series of TaN films on…

Microwave loss in superconducting titanium nitride (TiN) films is attributed to two-level systems in various interfaces arising in part from oxidation and microfabrication-induced damage. Atomic layer etching (ALE) is an emerging…

We have investigated properties of superconducting titanium nitride (TiN) films that were sputtered over a large range of RF-induced DC bias voltage applied to the substrate. Films grown with the largest bias voltages contained cubic TiN…

Soft ferromagnetic NiFe thin films are promising for applications in spintronic devices because of their constituent electrical and magnetic properties. Electron beam evaporation and sputtering techniques have been used to deposit NiFe thin…

This paper reports optical and nanomechanical properties of seldom studied highly a-axis oriented AlN thin films for the first time. These films were deposited by reactive DC magnetron sputtering technique at an optimal target to substrate…

Thin films of TiN were sputter-deposited onto Si and sapphire wafers with and without SiN buffer layers. The films were fabricated into RF coplanar waveguide resonators, and internal quality factor measurements were taken at millikelvin…

We investigate selective patterning of ultra-thin 20 nm Indium Tin Oxide (ITO) thin films on glass substrates, using 343, 515, and 1030 nm femtosecond (fs), and 1030 nm picoseconds (ps) laser pulses. An ablative removal mechanism is…

Pb(Zr0.52Ti0.48)O3 (PZT) thin films were in situ deposited by pulsed laser deposition (PLD) on Pt/Ti/SiO2/Si substrates using a template layer derived by sol-gel method. A 0.1-$\mu$m-thick PZT layer with (111) or (100)-preferred orientation…

We present a systematic study of the properties of TiN films by varying the deposition conditions in an ultra-high-vacuum reactive magnetron sputtering chamber. By increasing the deposition pressure from 2 to 9 mTorr while keeping a nearly…

We report the reduction in residual stress of AlN thin films and also the crystal structure, surface morphology and nanomechanical properties of magnetron sputtered as a function of substrate temperature (Ts, 35 - 600 ?C). The residual…

(111) NiO epitaxial layers embedded with crystallographically oriented Ni-clusters are grown on c-GaN/Sapphire templates using pulsed laser deposition technique. Structural and magnetic properties of the films are examined by a variety of…

In this work, we present the first experimental study of residual stress and post-release beam deflection in 128-degree Y-cut thin-film lithium niobate (TFLN) on Si, revealing pronounced stress anisotropy with in-plane orientation. Using…