相关论文: Superconducting TiN Films Sputtered over a Large R…

We present a systematic study of the properties of TiN films by varying the deposition conditions in an ultra-high-vacuum reactive magnetron sputtering chamber. By increasing the deposition pressure from 2 to 9 mTorr while keeping a nearly…

We report a novel method of growing strongly-disordered superconducting titanium nitride (TiN) thin films by reactive electron-beam deposition. The normal state sheet resistance and superconducting critical temperature (Tc) can be tuned by…

Thin films of TiN were sputter-deposited onto Si and sapphire wafers with and without SiN buffer layers. The films were fabricated into RF coplanar waveguide resonators, and internal quality factor measurements were taken at millikelvin…

The interplay between substrates and superconducting thin films has attracted increasing attention. Here, we report an in-depth investigation on superconducting properties of the epitaxial TiN thin films grown on three different substrates…

Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. In…

Superconducting thin films with high intrinsic kinetic inductance $L_{k}$ are important for high-sensitivity detectors, enabling strong coupling in hybrid quantum systems, and enhancing nonlinearities in quantum devices. We report the…

We report on the fabrication and characterization of superconducting coplanar waveguide (CPW) resonators based on titanium nitride (TiN) thin films deposited on 200\,mm diameter high-resistivity Si(100) substrates. We systematically…

This study presents a comprehensive investigation into the exceptional superconducting attributes of titanium nitride (TiN) achieved through plasma-enhanced atomic layer deposition (PEALD) on both planar and intricate three-dimensional (3D)…

Superconducting qubits are a promising platform for large-scale quantum computing. Besides the Josephson junction, most parts of a superconducting qubit are made of planar, patterned superconducting thin films. In the past, most qubit…

Titanium nitride (TiN) presents superior electrical conductivity with mechanical and chemical stability and compatibility with the semiconductor fabrication process. Here, we fabricated epitaxial and polycrystalline TiN (111) thin films on…

We report on the superconducting properties of molybdenum nitride thin films grown by reactive DC sputtering at room temperature with a N2:Ar mixture. Thin films grown using 5 % N2 concentration display Tc = 8 K, which is gradually reduced…

The structural and electrical properties of Ti-N films deposited by reactive sputtering depend on their growth parameters, in particular the Ar:N2 gas ratio. We show that the nitrogen percentage changes the crystallographic phase of the…

Typically the superconducting phase weakens at several points with the increase in disorder before it is distroyed in the 2d-thin films. This may lead to an inhomogeneous superconducting state without a continuous phase. Here we present…

A current approach to depositing highly plasmonic titanium nitride films using the magnetron sputtering technique assumes that the process is performed at temperatures high enough to ensure the atoms have sufficient diffusivities to form…

Titanium nitride (TiNx) films are ideal for use in superconducting microresonator detectors because: a) the critical temperature varies with composition (0 < Tc < 5 K); b) the normal-state resistivity is large, \rho_n ~ 100 $\mu$Ohm cm,…

Transition-metal nitrides (e.g., TiN, ZrN, TaN) are incredible materials with excellent complementary-metal-oxide-semiconductor compatibility and remarkable performance in refractory plasmonics and superconducting quantum electronics.…

This work reports a pulsed laser-assisted synthesis, detailed structural characterization, and study of plasmonic properties of three sets of TiN/TiNO thin films with high electron density. The first two sets of TiN films were grown at 600C…

This study investigates the molecular beam epitaxial (MBE) growth of titanium nitride (TiN) thin films, achieving a high residual resistivity ratio (RRR) of 15.8. We observed a strong correlation between growth temperature and crystalline…

We present in this paper the conductance maps at 100 mK in the disordered polycrystalline film of titanium nitride (TiN). At 5 nm, the film is close to quasi-two dimensional limit and exhibits features pertaining to the superconductor to…

Superconductivity has been found in RuN films obtained by reactive magnetron sputtering. This is a novel member of the metal nitride superconductors family. The critical temperature of the superconducting transition varies depending on the…