相关论文: The Effects of Geometry on a-Si:H Solar Cell Perfo…

Recently, a homogenization procedure has been proposed, based on the tight lower bounds of the Bergman-Milton formulation, and successfully applied to dilute ternary nanocomposites to predict optical data without using any fitting…

In this paper we study CdS/CdTe solar cells by means of AMPS-1D software. First we study the effect of thickness of semiconductor layers on the output parameters of the CdS/CdTe solar cell, such as density of short-circuit current, open…

An optoelectronic optimization was carried out for an AlGaAs solar cell containing (i) an n-AlGaAs absorber layer with a graded bandgap and (ii) a periodically corrugated Ag backreflector combined with localized ohmic Pd-Ge-Au backcontacts.…

Hydrogenated amorphous silicon (a-Si:H) is a material having an intrinsically high radiation hardness that can be deposited on flexible substrates like Polyimide. For these properties a-Si:H can be used for the production of flexible…

It is currently possible to fabricate crystalline silicon solar cells with the absorber thickness ranging from a few hundreds of micrometers (conventional wafer-based cells) to devices as thin as $1\,\mu\mathrm{m}$. In this work, we use a…

The light absorption of [001] grown single-crystalline silicon wafers can be enhanced by chemical etching with potassium hydroxide resulting in a pyramid-like surface texture. Alongside this advantageous property in the context of solar…

In the frame of the development of thin crystalline silicon solar cell technologies, surface nanopatterning of silicon is gaining importance. Its impact on the material quality is, however, not yet fully controlled.We investigate here the…

Solution-processable, two-dimensional semiconductors are promising optoelectronic materials which could find application in low-cost solar cells. Lead sulfide nanocrystals raised attention since the effective band gap can be adapted over a…

The nanostructure of hydrogenated amorphous silicon (a Si:H) is studied by a combination of small-angle X-ray (SAXS) and neutron scattering (SANS) with a spatial resolution of 0.8 nm. The a-Si:H materials were deposited using a range of…

Moisture in the form of humidity has a significant impact on the operation of photovoltaic (PV) cells and panels. Moisture is often diffuse through the encapsulant film (Ethylene Vynil Acetate (EVA), PVB, PVF, PMMA) or the breathable…

We report on the recording of 3D optical memories in sol-gel materials by using a non-linear absorption effect. This effect induces a local change of the optical properties of the material which is read and quantified with a high resolution…

While various nanophotonic structures applicable to relatively thin crystalline silicon-based solar cells were proposed to ensure effective light in-coupling and light trapping in the absorber, it is of great importance to evaluate their…

Monocrystalline silicon solar cells with photo-absorbing morphology can amplify light-trapping properties within the absorber layer and help to fabricate cost-effective solar cells. In this paper, the effect of different parameters namely…

Recently, liquid-phase crystallization of thin silicon films has emerged as a promising candidate for thin-film photovoltaics. On 10 \mu m thin absorbers, wafer-equivalent morphologies and open-circuit voltages were reached, leading to a…

We have computed the electronic and hole spectra of a 3D superlattice consisting of layers of GaAs rods of finite height arranged in a hexagonal lattice and embedded in an AlGaAs matrix, alternating with spacer layers of homogeneous AlAs.…

In spite of having higher carrier mobilities and absorption coefficients of germanium (Ge) than those of silicon (Si), there has been less focus on Ge-based solar cells due to the low bandgap and high-cost of Ge wafer as well as requirement…

Optical properties of core-shell-shell Au@SiO2@Au nanostructures and their solar energy harvesting applications are theoretically investigated using Mie theory and heat transfer equations. The theoretical analysis associated with…

It is known that silicon is an indirect band gap material, reducing its efficiency in photovoltaic applications. Using surface plasmons in metallic nanoparticles embedded in a solar cell has recently been proposed as a way to increase the…

In the last few years there is an unprecedented progress in the increase of the power conversion efficiency of perovskite solar cells. Evidently, further advances of the efficiency of these devices will depend on the constraints imposed by…

Implementation of resonant colloidal nanoparticles for improving performance of organometal halide perovskites solar cells is highly prospective approach, because it is compatible with the solution processing techniques used for any organic…