相关论文: The Effects of Geometry on a-Si:H Solar Cell Perfo…
Colored solar cells suffer from lower efficiency due to reflection and absorption losses by coatings. By studying different types of coatings on solar cells, the spectrum parameters impacting the solar cell efficiency were identified. A…
Carrier selective (CS) silicon solar cells are increasingly explored using a variety of different materials. However, the optimum properties of such CS materials are not well understood. In this context, through detailed analytical and…
The incoherence of sunlight has long been suspected to have an impact on solar cell energy conversion efficiency, although the extent of this is unclear. Existing computational methods used to optimize solar cell efficiency under incoherent…
Amorphous hydrogenated silicon (a-Si:H) is an important material for surface defect passivation of photovoltaic silicon (Si) wafers in order to reduce their recombination losses. The material is however unstable with regards to hydrogen (H)…
Perovskite solar cells have reached power conversion efficiencies that rival those of established silicon photovoltaics. Nanotextures in perovskite solar cells scatter the incident light, thereby improving optical absorption. In addition,…
Nanowires have unique optical properties [1-4] and are considered as important building blocks for energy harvesting applications such as solar cells. [2, 5-8] However, due to their large surface-to-volume ratios, the recombination of…
This paper investigates the impact of electrode geometry on the performance of polymer solar cells (PSCs). Four types of negative electrodes with equal area (0.09 cm2) but different shape (round, oval, square, and triangular) are evaluated…
We propose an efficient plasmonic structure consisting of metal strips and thin-film silicon for solar energy absorption. We numerically demonstrate the absorption enhancement in symmetrical structure based on the mode coupling between the…
Theoretically and experimentally we have proved the existence of optimal thickness of the porous layer used as an anti-reflection coating in solar cells. We have taken into account the joint mechanisms of generation and recombination of…
An innovative image analysis technique is proposed to process real solar cell pictures, identify grains and grain boundaries in polycrystalline Silicon, and finally generate finite element meshes. Using a modified intrinsic cohesive zone…
Solar cells with the structure ITO-PEDOT:PSS-Ag:SnS-Al were fabricated with the active layer of tin sulphide with silver nano-particles (Ag:SnS) grown by thermal co-evaporation. To understand the influence of the silver nanoparticles on the…
The silicon-hydrogen system is of key interest for solar-cell devices, including both crystalline and amorphous modifications. Elemental amorphous Si is now well understood, but the atomic-scale effects of hydrogenating the silicon matrix…
Polymer solar cells are considered as very promising candidates for development of photovoltaics of the future. They are cheap and easy to fabricate. However, up to now, they possess fundamental drawback: low effectiveness. In the most…
As a potential solution for low-cost efficient solar cells, radial junctions consisting of ZnO nanowires arrays embedded in Cu2O thin films have been theoretically modeled. Calculations have been performed to explore the geometric…
Organic solar cells (OSCs) are uniquely suited for semitransparent applications due to their adjustable absorption spectrum. However, most high-performance semitransparent cells reported to date are based on materials that have shown high…
Coating and reflecting thin films for energy harvesting purposes are interesting topics in both theoretical and experimental research. The thin film could help to enhance the absorption of the system via its specific optical properties…
Hot carrier solar cells allow potential efficiency close to the thermodynamical limit in ideal conditions. However, the feasability of such devices has not been clearly stated so far and only ideal cells were considered in previous studies.…
Light trapping in solar cells allows for increased current and voltage, as well as reduced materials cost. It is known that in geometrical optics, a maximum 4n^2 absorption enhancement factor can be achieved by randomly texturing the…
The hybrid metal-dielectric nanostructures (HMDN) are promising candidates to address the ohmic loss by conventional nanostructures in photovoltaic applications by strong confinement and high scattering directivity. In this study, we…
Hydrogenated amorphous silicon alloy films are generally deposited by radio frequency plasma enhanced chemical vapor deposition (RF PECVD) technique on various types of substrates. Generally it is assumed that film quality remains unchanged…