相关论文: Sub-nanometer flattening of a 45-cm long, 45-actua…
Active optics has attracted considerable interest from researchers in synchrotron radiation facilities, because of its capacity for x-ray wavefront correction. Here, we report a novel and efficient technique for correcting or modulating a…
Optical resonators are increasingly important tools in science and technology. Their applications range from laser physics, atomic clocks, molecular spectroscopy, and single-photon generation to the detection, trapping and cooling of atoms…
We performed closed-loop lab testing of large-format deformable mirrors (DMs) with hybrid variable reluctance actuators. TNO has been developing the hybrid variable reluctance actuators in support for a new generation of adaptive secondary…
The Thirty Meter Telescope will use a sophisticated adaptive optics system called NFIRAOS. This system utilizes two deformable mirrors conjugate to 0 km and 11.2 km to apply a Multi-Conjugate Adaptive Optics (MCAO) correction over a 2…
We present the experimental performance of a 91-actuator deformable mirror made of a magnetic liquid (ferrofluid) using a new technique that linearizes the response of the mirror by superposing a uniform magnetic field to the one produced…
We present the design, fabrication, and measured performance of metamaterial Anti-Reflection Cuttings (ARCs) for large-format alumina filters operating over more than an octave of bandwidth to be deployed on the Simons Observatory (SO). The…
Optics for future X-ray telescopes will be characterized by very large aperture and focal length, and will be made of lightweight materials like glass or silicon in order to keep the total mass within acceptable limits. Optical modules…
In this work, we design a new tunable nanofocusing lens by the linear-variant depths and nonlinear-variant widths of circular grating for far field practical applications. The constructively interference of cylindrical surface plasmon…
The Very Large Telescope Interferometer Auxiliary Telescopes will soon be equipped with an adaptive optics system called NAOMI. The corrective optics deformable mirror is the commercial DM241 from ALPAO. Being part of an interferometer…
We describe a new geometry for electrostatic actuators to be used in sensitive laser interferometers. The arrangement consists of two plates at the sides of the mirror (test mass), and therefore does not reduce its clear aperture as a…
This paper presents the first-principle design approach for X-ray active optics, using the simulation-modulation cycle in place of the measurement-modulation feedback loops used in traditional active optics. Hence, the new active optics…
The LAMP (Lightweight Asymmetry and Magnetism Probe) X-ray telescope is a mission concept to measure the polarization of X-ray astronomical sources at 250 eV via imaging mirrors that reflect at incidence angles near the polarization angle,…
We present the research status of a deformable mirror made of a magnetic liquid whose surface is actuated by a triangular array of small current carrying coils. We demonstrate that the mirror can correct a 11 microns low order aberrated…
The need for high dynamic range imaging is crucial in many astronomical fields, such as extra-solar planet direct detection, extra-galactic science and circumstellar imaging. Using a high quality coronograph, dynamic ranges of up to…
Controlled and precise fabrication of structures with heights in the range of single digit nanometres is one of the challenges for diffraction gratings operating near-normal incidence in the extreme ultraviolet (EUV) and soft X-ray range.…
A slicer mirror is a complex surface composed by many tilted and decentered mirrors sub-surfaces. The major difficulty to model such a complex surface is the large number of parameters used to define it. The Zemax's multi-configuration mode…
The MagAO-X instrument is an upgrade of the Magellan AO system that will introduce extreme adaptive optics capabilities for high-contrast imaging at visible and near-infrared wavelengths. A central component of this system is a…
We present a new type of tunable mirror with sharply-featured freeform displacement profiles, large displacements of several 100\mu m and high operating frequencies close to the kHz range at 15mm diameter. The actuation principle is based…
Laser cutting of semiconductor wafers and transparent dielectrics has become a dominant process in manufacturing industries, encompassing a wide range of applications from flat display panels to microelectronic chips. Limited by the…
We demonstrate micromechanical reflectors with a reflectivity as large as 99.4% and a mechanical quality factor Q as large as 7.8*10^5 for optomechanical applications. The reflectors are silicon nitride membranes patterned with…