相关论文: Structural/microstructural, optical and electrical…
Thin films of ZnO:SnO2 were deposited on different substrates like glass and c-Si using spray pyrolysis method .The structures and morphology of the prepared samples films were cheeked using X-ray diffraction and atomic force microscope.…
Bulk samples of $(Sn_{1-x}Sb_{x}O_{2-\delta})$ with x = 0.00, 0.10, 0.20, 0.30 are synthesized by solid-state reaction route. Samples were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission…
Thin p-type Sb-doped ZnO films were grown by filtered vacuum arc deposition (FVAD), on untreated glass samples. The arc cathode was prepared by dissolving Sb into molten Zn. The deposition was performed with 200 A arc current, running for…
Here we report on the structural, optical, electrical and magnetic properties of Co-doped and (Co,Mo)-codoped SnO2 thin films deposited on r-cut sapphire substrates by pulsed laser deposition. Substrate temperature during deposition was…
SnS2 stands out as a highly promising two-dimensional material with significant potential for applications in the field of electronics. Numerous attempts have been undertaken to modulate the physical properties of SnS2 by doping with…
This study reports on the properties of nitrogen doped titanium dioxide $TiO_2$ thin films considering the application as transparent conducting oxide (TCO). Sets of thin films were prepared by sputtering a titanium target under oxygen…
Nickel and antimony co-doped Ti/SnO2 (Ti/Ni-Sb-SnO2) anodes were prepared by spray pyrolysis. Effects of nickel concentration on the structure and onset potential for oxygen evolution of Ti/Ni-Sb-SnO2 anodes have been systematically…
In this paper, RF sputtered antimony vanadium oxide (SbVO4) thin films and its characterization are reported. High purity sputtering targets were fabricated by sintering a mixture of Sb2O3 and V2O5 powders. Thin films were deposited by…
The structural, optical and magnetic properties of the Zn1-xMnxO (0 < x < 0.05) thin films synthesized by sol-gel technique have been analyzed in the light of modification of the electronic structure and disorder developed in the samples…
Highly conducting $SnO_{2}$ thin films were prepared by chemical spray pyrolysis technique. One set of as-deposited films were annealed in air for 2 h at 850$^{o}$C. These as-deposited and annealed films were irradiated using $Au^{9+}$ ions…
Thin films of Zn2+ doped cupric oxide (CuO) were synthesized using spin coating technique starting from a solution with Cu and Zn. The speed of spin coating and time duration were varied to fabricate a film with required uniform thickness.…
(La and Ga)-doped tin monoxide (stannous oxide, tin (II) oxide, SnO) thin films were grown by plasma-assisted and suboxide molecular beam epitaxy with dopant concentrations ranging from $\approx5\times10^{18}$cm$^{-3}$ to…
LiNbO3 films doped with vanadium (V) were deposited using RF magnetron sputtering technique. To realize doping with a wider range of V concentration, a 30 mm V metal inlaid target asymmetrically embedded in the 150 mm lithium niobate target…
Thin films of inorganic materials as Tin-doped indium oxide, titanium oxide, Niobium doped titanium oxide, were deposited for comparison on glass and Polyethylene terephthalate (PET) substrates with a DC sputtering method. These thin films…
Tin (IV) oxide (SnO2) sols have been synthesized from SnCl2.2H2O precursor solution by applying two different processing conditions. The prepared sols were then deposited on UV-Ozone treated quartz and soda lime glass (SLG) substrates by…
In this paper we report the deposition of epitaxial thin films of Nd1-xSrxCoO3 with x=0, 0.2 and 0.5 on single crystalline substrates (SrTiO3 and LaAlO3) carried out by means of rf-magnetron sputtering. The deposited films are all…
By means of oxide molecular beam epitaxy with shutter-growth mode, we have fabricated a series of electron-doped (Sr1-xLax)2IrO4(001)(x = 0, 0.05, 0.1 and 0.15) single crystalline thin films and then investigated the doping dependence of…
To contemplate an alternative approach for the minimization of diffusion at high temperature depositions, present findings impart viability of room-temperature deposited reactively sputtered ScN thin film samples. The adopted room…
Thin films of thulium and ytterbium-doped titanium oxide were grown by metal-organic spray pyrolysis deposition from titanium(IV)oxide bis(acetylacetonate), thulium(III) tris(2,2,6,6-tetramethyl-3,5-heptanedionate) and ytterbium(III)…
Bacterial infections are a common problem in daily life that can affect human health. Researchers are looking for valuable materials that can help prevent such infections and environmental pollutants. Thin films are a well-known application…