相关论文: Sensors and Actuators for the Advanced LIGO Mirror…
As part of the Advanced LIGO+ (A+) project we have developed, produced, and characterised sensors and electronics to interrogate new optical suspensions. The central element is a displacement sensor with an integrated electromagnetic…
The original LIGO suspension control system [1] used analog circuitry to implement the closed loop damping required for local control of each the suspended optics. Recent developments in analog to digital converters (ADC), digital to analog…
The Advanced LIGO detectors are sophisticated opto-mechanical devices. At the core of their operation is feedback control. The Advanced LIGO project developed a custom digital control and data acquisition system to handle the unique needs…
We report on the design and performance of small optic suspensions developed to suppress seismic motion of out-of-cavity optics in the Input Optics subsystem of the Advanced LIGO interferometric gravitational wave detector. These compact…
Displacement sensors have a variety of applications within gravitational wave detectors. The seismic isolation chain of the LIGO core optics utilises optical shadow sensors for their stabilisation. Future upgrades, such as LIGO Voyager,…
New generations of gravity wave detectors require unprecedented levels of vibration isolation. This paper presents the final design of the vibration isolation and positioning platform used in Advanced LIGO to support the interferometers…
The LIGO Interferometer Sensing and Control System (ISC) is a large and highly distributed Multiple Input Multiple Output (MIMO) control system that is used to control the length and alignment degrees of freedom of the interferometers. The…
This paper presents the results of the past seven years of experimental investigation and testing done on the two-stage twelve-axis vibration isolation platform for Advanced LIGO gravity waves observatories. This five-ton two-and-half-meter…
Large astronomical instruments using tens to hundreds of optical or infrared science detectors pose specific challenges for detector control, where, in addition to performance, other engineering aspects like scalability, power consumption,…
Isolating ground-based interferometric gravitational wave observatories from environmental disturbances is one of the great challenges of the advanced detector era. In order to directly observe gravitational waves, the detector components…
This paper presents an analysis of the transient behavior of the Advanced LIGO suspensions used to seismically isolate the optics. We have characterized the transients in the longitudinal motion of the quadruple suspensions during Advanced…
The Laser Interferometer Gravitational-wave Observatory (LIGO) consists of two identical yet independent, widely-separated, long-baseline gravitational-wave detectors. Each Advanced LIGO detector consists of complex optical-mechanical…
The Advanced LIGO gravitational wave detectors are nearing their design sensitivity and should begin taking meaningful astrophysical data in the fall of 2015. These resonant optical interferometers will have unprecedented sensitivity to the…
We describe the angular sensing and control of the 4 km detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO). The culmination of first generation LIGO detectors, Enhanced LIGO operated between 2009 and 2010 with about…
The LIGO Control and Data system (CDS) features a tightly coupled and highly integrated control and data acquisition system. Control of the interferometers requires many Multiple Input Multiple Output (MIMO) control loops closed both…
The sensitivity of ground-based gravitational wave (GW) detectors will be improved in the future via the injection of frequency-dependent squeezed vacuum. The achievable improvement is ultimately limited by losses of the interferometer…
An innovative Cylindrical Gas Electron Multiplier (CGEM) detector is under construction for the upgrade of the inner tracker of the BESIII experiment. A novel system has been worked out for the readout of the CGEM detector, including a new…
The detectors of the laser interferometer gravitational-wave observatory (LIGO) are broadly limited by the quantum noise and rely on the injection of squeezed states of light to achieve their full sensitivity. Squeezing improvement is…
This is an overview of the adaptive optics used in Advanced LIGO (aLIGO), known as the thermal compensation system (TCS). The thermal compensation system was designed to minimize thermally-induced spatial distortions in the interferometer…
Seismic noise will be the dominant source of noise at low frequencies for ground based gravitational wave detectors, such as LIGO now under construction. Future interferometers installed at LIGO plan to use at least a double pendulum…