相关论文: A 100 mA Low Voltage Linear Regulators for Systems…

In this paper, we propose a novel optimal power allocation method that features a power limit function and is able to ensure more users reach the desired Quality-of-Service (QoS). In our model we use sigmoidal-like utility functions to…

Low Power Wide Area (LPWA) networks are attracting a lot of attention primarily because of their ability to offer affordable connectivity to the low-power devices distributed over very large geographical areas. In realizing the vision of…

In this paper, we propose and evaluate two novel double-sequence low-resolution frequency synchronization methods in millimeter-wave (mmWave) systems. In our system model, the base station uses analog beams to send the synchronization…

In this paper, the application of non-binary low-density parity-check (NBLDPC) codes to MIMO systems which employ hundreds of antennas at both the transmitter and the receiver has been proposed. Together with the well-known low-complexity…

Complementary-metal-oxide-semiconductor (CMOS) is the most widely spread technology for integrated circuits fabrication. Each foundry offers different technology nodes that are characterized by the minimum feature size, which is the…

Line codes make it possible to mitigate interference, to prevent short pulses, and to generate streams of bipolar signals with no direct-current (DC) power content through balancing. They find application in magnetic recording (MR) devices,…

Conservation voltage reduction(CVR) uses Volt-VAR optimization(VVO) methods to reduce customer power demand by controlling the feeders' voltage control devices. The objective of this paper is to present a VVO approach that controls the…

A low cost PC based real time data logging system can be used in the laboratories for the measurement, monitoring and storage of the data for slowly varying signals in science and engineering stream. This can be designed and interfaced to…

One of the biggest challenges impeding the progress of Metal-Oxide-Silicon (MOS) quantum dot devices is the presence of disorder at the Si/SiO$_2$ interface which interferes with controllably confining single and few electrons. In this work…

Distribution network operators (DNOs) are increasingly concerned about the impact of low carbon technologies on the low voltage (LV) networks. More advanced metering infrastructures provide numerous opportunities for more accurate load flow…

This paper presents the first voltage-controlled MEMS oscillator (VCMO) based on a Lithium Niobate (LiNbO3) lateral overtone bulk acoustic resonator (LOBAR). The VCMO consists of a LOBAR in a closed loop with 2 amplification stages and a…

High linear voltage references circuitry are designed and implemented in TSMC 0.18$\mu$m CMOS technology. Previous research has proposed the use of MOS transistors operating in the weak inversion region to replace the bipolar devices in…

Voltage (Volt) and reactive-power (VAR) control in transmission networks is critical for reliability and increasingly needs fast, implementable decisions. This paper presents a transmission Volt/VAR Optimization (VVO) framework that…

Phasor measurement units (PMUs) create ample real-time monitoring opportunities for modern power systems. Among them, line outage detection and identification remains a crucial but challenging task. Current works on outage identification…

The high voltage system supplies the bias voltage to the 88 silicon sensors which comprise the LHCb Vertex Locator (VELO). This note describes the results of the tests which have been performed on the hardware of the high voltage system of…

This article describes the design methodology to achieve reflective diode-based parametric frequency selective limiters (pFSLs) with low power thresholds ($P_{th}$) and sub-dB insertion-loss values ($IL^{s.s}$) for driving power levels…

A widely embraced approach to mitigate the dynamic degradation in low-inertia power systems is to mimic generation response using grid-connected inverters to restore the grid's stiffness. In this paper, we seek to challenge this approach…

Discontinuity layout optimization (DLO) is a relatively new upper bound limit analysis method. Compared to classic topology optimization methods, aimed at obtaining the optimum design of a structure by considering its self-weight, building…

Normal conducting linear particle accelerators consist of multiple rf stations with accelerating structure cavities. Low-level rf (LLRF) systems are employed to set the phase and amplitude of the field in the accelerating structure, and to…

As the Internet of Things (IOT) is growing rapidly, there is an emerging need to facilitate development of IOT devices in the design cycle while optimized performance is obtained in the field of operation. This paper develops…