相关论文: RF thermal and new cold part design studies on TTF…
For an electron gas with delta-function attraction we investigate the crossover from weak- to strong-coupling supercoductivity in two and three dimensions. We derive analytic expressions for the stiffness of phase fluctuations and set up…
By combining Three Dimensional Integrated Circuits with the Network-on-Chip infrastructure to obtain 3D Networks-on-Chip (3D-NoCs), the new on-chip communication paradigm brings several advantages on lower power, smaller footprint and lower…
Conductor on a rounded core (CORC\textsuperscript{\textregistered}) cables with current densities beyond 300 A/mm$^{-2}$ at 4.2 K, and a capacity to retain around 90 $\%$ of critical current after bending to a diameter of 3.5 cm, make them…
Recently, the films of the Ruddlesden-Popper (RP) nickelate superconductors, in which the (La,Pr)$_3$Ni$_2$O$_7$ system exhibits a remarkable transition temperature $T_c$ exceeding 40 K, were synthesized at ambient pressure. We…
The discovery of a superconducting phase in sulfur hydride under high pressure with a critical temperature above 200 K has provided a new impetus to the search for even higher $T_c$. Theory predicted and experiment confirmed that the phase…
The 2014-2015 prediction, discovery, and confirmation of record high temperature superconductivity above 200K in H$_3$S, followed by the 2018 extension to superconductivity in the 250-280K range in lanthanum hydride, marks a new era in the…
The A15 structure of superconductors is a prototypical type-II superconductor that has generated considerable interest since the early history of superconducting materials. This paper discusses the superconducting properties of previously…
The compression of SH$_2$ and its subsequent decomposition to SH$_3$, presumably in a cubic Im$\overline{3}$m structure, has lead to the discovery of conventional superconductivity with the highest measured and confirmed $T_c$ to date, 203…
Recently room temperature superconductivity with Tc=15 degrees Celsius has been discovered in a pressurized complex ternary hydride, CSHx, which is a carbon doped H3S alloy. The nanoscale structure of H3S is a particular realization of the…
SOLPS-ITER simulation is performed to reproduce the X-point radiator recently observed in nitrogen-seeded TCV experiments, which is a scenario that may be favorable to solve the power exhaust problems in future fusion devices. The…
Future superconducting radio frequency (SRF) cavities, as part of Project X at Fermilab, will be cooled to superfluid helium temperatures by a cryogenic distribution system supplying cold supercritical helium. To reduce vapor fraction…
The construction of the 60-MeV proton linac has started as a low-energy front of the KEK/JAERI Joint Project for a high-intensity proton accelerator facility at KEK. The accelerating frequency is 324 MHz. Five UHF klystrons are used as an…
The pairing symmetry of the newly proposed cobalt high temperature (high-$T_c$) superconductors formed by vertex shared cation-anion tetrahedral complexes is studied by the methods of mean field, random phase approximation (RPA) and…
In modern Nb3Sn wires there is a fundamental compromise to be made between optimizing the intrinsic properties associated with the superfluid density in the A15 phase (e.g. Tc, Hc, Hc2, all of which are composition dependent), maximizing…
We study electronic properties of a superconducting topological insulator whose parent material is a topological insulator. We calculate the temperature dependence of the specific heat and spin susceptibility for four promising…
Project-X is the proposed high intensity proton facility to be built at Fermilab, US. Its Superconducting Linac, to be used at first stage of acceleration, will be operated in continuous wave (CW) mode. The Linac is divided into three…
One of the most important issues of high-power hadron linacs is the choice of technology with respect to superconducting or room-temperature operation. The favour for a specific technology depends on several parameters such as the beam…
High-temperature superconductor (HTS) coated conductors (CC) are often wound into pancake coils with electrical insulation in-between the turns. The copper terminals are used for current injection and conduction cooling. An inherent…
High transition temperature (high-Tc) superconductivity is associated with layered crystal structures. This work considers superconductivity in ultra-thin crystals (of thickness equal to the transverse structural periodicity distance d for…
3D integration technologies are seeing widespread adoption in the semiconductor industry to offset the limitations and slowdown of two-dimensional scaling. High-density 3D integration techniques such as face-to-face wafer bonding with…