相关论文: A New System Noise Measurement Method Using a 2-bi…

We are developing large TES arrays in combination with FDM readout for the next generation of X-ray space observatories. For operation under AC-bias, the TESs have to be carefully designed and optimized. In particular, the use of high…

This paper focuses on channel estimation in single-user and multi-user MIMO systems with multi-antenna base stations equipped with 1-bit spatial sigma-delta analog-to-digital converters (ADCs). A careful selection of the quantization…

Precision measurements of parity non-conserving (PNC) interactions in atoms, molecules and ions can lead to the discovery of new physics beyond the standard model and understanding of weak-force induced interactions in the nucleus. In this…

This paper presents and evaluates a novel method for generating power losses on transistors avoiding high currents. These could heat up the circuit tracks, affecting the accurate thermal modeling of the system. The proposed procedure is…

Direction of arrival (DOA) estimation employing low-resolution analog-to-digital convertors (ADCs) has emerged as a challenging and intriguing problem, particularly with the rise in popularity of large-scale arrays. The substantial…

In this paper, we present a basic model for time-interleaved photonic analog-to-digital converter (TIPADC) and analyze its linear, nonlinear, and noise performance. The basic operation mechanism of TIPADC is illustrated and the linear…

An observer based adaptive detection methodology (ADM) is proposed for estimating frequency and its rate of change (RoCoF) of the voltage and/or current measurements acquired from an instrument transformer. With guaranteed convergence and…

This paper describes the setup and the results of the direct on-wafer measurements of a FET noise parameters obtained with a source-pull method at temperatures down to T=4K and in the 5-12 GHz frequency range. The setup consists of a…

This paper presents a low-power 10-bit 130-MS/s successive approximation register (SAR) analog-to-digital converter (ADC) in 90 nm CMOS process. The proposed asynchronous ADC consists of a comparator, SAR logic block and two control blocks…

Analog-to-digital converters (ADCs) are a major contributor to the power consumption of multiple-input multiple-output (MIMO) communication systems with large number of antennas. Use of low resolution ADCs has been proposed as a means to…

Transition-edge sensors (TESs) are used as very sensitive thermometers in microcalorimeters aimed at detection of different wavelengths. In particular, for soft X-ray astrophysics, science goals require very high resolution…

In this work, a 3.5 GS/s voltage-controlled oscillator (VCO) analog-to-digital converter (ADC) using multi-stage noise shaping (MASH) is presented. This 28nm CMOS ADC achieves second-order noise shaping in an easily-scalable, open-loop…

Analog to Digital Converters (ADCs) are a major contributor to the energy consumption on the receiver side of millimeter-wave multiple-input multiple-output (MIMO) systems with large antenna arrays. Consequently, there has been significant…

Low-resolution analog-to-digital converters (ADCs) have emerged as a promising technology for reducing power consumption and complexity in massive multiple-input multiple-output (MIMO) systems while maintaining satisfactory spectral and…

High data rates require vast bandwidths, that can be found in the sub-THz band, and high sampling frequencies, which are predicted to lead to a problematically high analog-to-digital converter (ADC) power consumption. It was proposed to use…

When measuring quadratic values representative of random fluctuations, such as the thermal noise of Atomic Force Microscopy (AFM) cantilevers, the background measurement noise cannot be averaged to zero. We present a signal processing…

We describe the design and performance of a series of fast, precise current sensing noise thermometers. The thermometers have been fabricated with a range of resistances from 1.290 $\Omega$ down to 0.2 m$\mathrm{\Omega}$. This results in…

We designed a versatile analog front-end chip, called LTARS, for TPC-applications, primarily targeted at dual-phase liquid Ar-TPCs for neutrino experiments and negative-ion $\mu$-TPCs for directional dark matter searches. Low-noise…

The Allan variance of signal and reference frequencies is measured by a least-squares fit of the output of two analog-to-digital converters (ADC's) to ideal sine waves. The difference in the fit phase of the two channels generates the…

The possibility of a new type of computing, where thermal noise is the information carrier and the clock in a computer, is studied. The information channel capacity and the lower limit of energy requirement/dissipation are studied in a…