相关论文: Miniaturized Fluorescence Excitation Platform with…

Anisotropic etching is a widely used process in semiconductor manufacturing, in particular for micro- and nano-scale texturing of silicon surfaces for black silicon production. The typical process of plasma-assisted etching uses energetic…

Evanescent-wave microscopy achieves sub-diffraction axial sectioning by confining fluorescence excitation to a thin layer close to the cell/substrate interface. How thin this light sheet exactly is, however, is often unknown. Particularly…

Ground-based millimeter and sub-millimeter telescopes are attempting to image the sky with ever-larger cryogenically-cooled bolometer arrays, but face challenges in mitigating the infrared loading accompanying large apertures. Absorptive…

A micro-ring-resonator (MRR) optical biosensor based on the evanescent field sensing mechanism has been extensively studied due to its high sensitivity and compact device size. However, a suitable on-chip integrated spectrometer device has…

Mid-infrared photothermal microscopy is a new chemical imaging technology in which a visible beam senses the photothermal effect induced by a pulsed infrared laser. This technology provides infrared spectroscopic information at sub-micron…

By patterning a freestanding dielectric membrane into a photonic crystal reflector (PCR), it is possible to resonantly enhance its normal-incidence reflectivity, thereby realizing a thin, single-material mirror. In many PCR applications,…

We demonstrate the fabrication of an optical nanofiber tip (ONFT) using a two-step chemical etching technique. This technique employs 30% and 24% hydrofluoric (HF) acid for the first and second steps, respectively. In the first step, a…

Short (40-200 microseconds) single focused CO2 laser pulses of energy of about 100 microJ were used to fabricate high quality concave micromirror templates on silica and fluoride glass. The ablated features have diameters of 20-100 microns…

Artificial nanostructures with ultrafine and deep-subwavelength feature sizes have emerged as a paradigm-shifting platform to advanced light field management, becoming a key building block for high-performance integrated optoelectronics and…

We describe a microscope-based optical setup that allows us to perform space-and time-resolved measurements of the spectral reflectance of transparent substrates coated with ultrathin films. This technique is applied to investigate the…

Monocrystalline silicon solar cells with photo-absorbing morphology can amplify light-trapping properties within the absorber layer and help to fabricate cost-effective solar cells. In this paper, the effect of different parameters namely…

We present a simple technique to produce active Q-switching in various types of fiber amplifiers by active integration of an electrostatic actuated deformable metallic micro-mirror. The optical MEMS (MOEMS) device acts as one of the laser…

Efficient machine learning inference is essential for the rapid adoption of artificial intelligence across various domains.On-chip optical computing has emerged as a transformative solution for accelerating machine learning tasks, owing to…

Fluorescence microscopy is widely used in biological imaging, however scattering from tissues strongly limits its applicability to a shallow depth. In this work we adapt a methodology inspired from stellar speckle interferometry, and…

We present the novel design of microfabricated, silicon-substrate based mirrors for use in cryogenic Fabry-Perot Interferometers (FPIs) for the mid-IR to sub-mm/mm wavelength regime. One side of the silicon substrate will have a…

We propose and experimentally demonstrate a novel optical method for trapping and cooling dielectric nanospheres at (sub)-micron distances from a reflective metallic surface. By translating a tilted mirror towards the focus of a single-beam…

We experimentally demonstrate the fabrication of optical micro/nanofibers (MNFs) using chemical etching and gas-flame techniques. In the chemical etching technique, a two-step process involves 40% and 24% of hydrofluoric acid solutions for…

Gold micro-mirrors have been formed in silicon in an inverted pyramidal shape. The pyramidal structures are created in the (100) surface of a silicon wafer by anisotropic etching in potassium hydroxide. High quality micro-mirrors are then…

Strain-engineering of materials encompasses significant elastic deformation and leads to breaking of the lattice symmetry and as a consequence to the emergence of optical anisotropy. However, the capability to image and map local strain…

There are several methods to focus light behind a scattering medium, but very few use fluorescence light as feedback or can be used without access to the distal side of the scatterer. Among all the wave-front shaping techniques, retrieving…