Related papers: Negative capacitance overcomes Schottky-gate limit…
Metal-semiconductor interfaces, known as Schottky junctions, have long been hindered by defects and impurities. Such imperfections dominate the electrical characteristics of the junction by pinning the metal Fermi energy. We report…
A low complexity computational model of the current-voltage characteristics for graphene nano-ribbon (GNR) field effect transistors (FET), able to simulate a hundred of points in few seconds using a PC, is presented. For quantum capacitance…
Ballistic electron emission microscopy (BEEM) was performed to obtain nanoscale current versus bias characteristics of non-epitaxial Au on p-type GaAs in order to accurately measure the local Schottky barrier height. Hole injection BEEM…
We study low-frequency noise in current passing through quantum point contacts fabricated from several GaAs/AlGaAs heterostructures with different layer structures and fabrication processes. In contrast to previous reports, there is no…
We analyze the properties of Fe Schottky contacts prepared in situ on n-type GaN(0001) by molecular beam epitaxy. In particular, we investigate the suitability of these epitaxial Fe layers for electrical spin injection.…
While decreasing the oxide thickness in carbon nanotube field-effect transistors (CNFETs) improves the turn-on behavior, we demonstrate that this also requires scaling the range of the drain voltage. This scaling is needed to avoid an…
In this paper we propose a modified structure of TFET incorporating ferroelectric oxide as the complementary gate dielectric operating in negative capacitance zone, called the Negative Capacitance Tunnel FET (NCTFET). The proposed device…
To explore the potential of field-effect transistors (FETs) based on monolayers of the two-dimensional semiconducting channel(SC) for spintronics, the two most important issues are to ensure the formation of variable low resistive tunnel…
In this letter, we demonstrate a lateral AlGaN/GaN Schottky barrier diode (SBD) on sapphire substrate with low turn-on voltage (Von) and high breakdown voltage (VBK). By using a double barrier anode (DBA) structure formed by the mixture of…
A widely used technique to mitigate the gate leakage in the ultra-scaled metal oxide semiconductor field effect transistors (MOSFETs) is the use of high-k dielectrics, which provide the same equivalent oxide thickness (EOT) as $\rm SiO_2$,…
The effects of different substrates on the off state leakage current in gallium nitride planar diodes are experimentally demonstrated and studied by analyzing temperature-dependent current voltage characteristics.
In this letter, we demonstrate high-performance lateral AlGaN/GaN Schottky barrier diodes (SBD) on Si substrate with a recessed-anode structure. The optimized rapid etch process provides results in improving etching quality with a 0.26-nm…
Atomically-thin 2D semiconducting materials integrated into van der Waals heterostructures have enabled architectures that hold great promise for next generation nanoelectronics. However, challenges still remain to enable their full…
Layered semiconductors show promise as channel materials for field-effect transistors (FETs). Usually, such devices incorporate solid back or top gate dielectrics. Here, we explore de-ionized (DI) water as a solution top gate for…
An inherent difficulty in studying mesoscopic effects in semiconductor--superconductor hybrid structures is the large Schottky barrier which often forms at the interface. A large technological effort has been invested in in improving the…
Spin-gapless semiconductors (SGSs) are a promising class of materials for spintronic applications, enabling functions beyond conventional electronics. This study introduces a novel design for multifunctional spintronic field-effect…
A new fabrication technique is used to produce quantum dots with read-out channels in silicon/silicon-germanium two-dimensional electron gases. The technique utilizes Schottky gates, placed on the sides of a shallow etched quantum dot, to…
Molecular beam epitaxy is employed to manufacture self-assembled InAs/GaAs quantum dot Schottky resonant tunneling diodes. By virtue of a thin AlAs insertion barrier, the thermal current is effectively reduced and electron resonant…
The cold source field-effect transistor (CSFET) is promising for reducing power dissipation in integrated circuits by engineering the density of states at the injecting source. Existing CSFET designs utilizing Dirac-source metals or…
We analyze the distributions of electric potential and field, polarization and charge, and the differential capacitance of a silicon metal-oxide-ferroelectric field effect transistor (MOSFET), in which a gate insulator consists of thin…