Related papers: Quantitative Formulation of Frequency-Dependent Av…
Here we obtain analytical expressions for the frequency response of a cantilever beam in the presence of ambient fluid. The advantage of our approach, besides its simplicity of use, is that it explicitly contains the viscosity and the…
A method is presented for calibrating the higher eigenmodes (resonance modes) of atomic force microscopy cantilevers that can be performed prior to any tip-sample interaction. The method leverages recent efforts in accurately calibrating…
Quantifying the nanomechanical properties of soft-matter using multi-frequency atomic force microscopy (AFM) is crucial for studying the performance of polymers, ultra-thin coatings, and biological systems. Such characterization processes…
Torsional harmonic cantilevers allow measurement of time varying tip-sample forces in tapping-mode atomic force microscopy. Accuracy of these force measurements is important for quantitative nanomechanical measurements. Here we demonstrate…
We examine the mechanical eigenmodes of a quartz tuning fork (QTF) for the purpose of facilitat- ing its use as a probe for multi-frequency atomic force microscopy (AFM). We perform simulations based on the three-dimensional finite element…
We investigate the capillary force that applies on a tilted cylinder as a function of its dipping angle i, using a home-built tilting Atomic Force Microscope (AFM) with custom made probes. A micrometric-size rod is glued at the end of an…
We investigate the dynamics of mechanical resonators subject to excitations comprising of an oscillating or harmonic part, whose amplitude decays exponentially in time. We call these complex frequency excitations and show that the resulting…
We propose a general one-dimensional {\em continuous} formulation to analyze the vibrational modes of antenna-like nanomechanical resonators consisting of two symmetric arrays of cantilevers affixed to a central nano-beam. The cantilever…
Atomic Force Microscopy - Infrared (AFM-IR) has emerged as a useful technique for measuring absorption spectra with spatial resolution better than the optical diffraction limit. The technique relies on the movement of a probe for atomic…
We demonstrate AFM imaging with a microcantilever force transducer where an integrated superconducting microwave resonant circuit detects cantilever deflection using the principles of cavity optomechanics. We discuss the detector…
We experimentally surpass the 3dB limit to steady state parametric squeezing of a mechanical oscillator. The localization of a AFM cantilever, achieved by optimal estimation, is enhanced by up to 6.2 dB in one position quadrature when a…
We measure the mechanical thermal noise of soft silicon atomic force microscopy cantilevers. Using an interferometric setup, we have a resolution down to 1E-14 m/rtHz on a wide spectral range (3 Hz to 1E5 Hz). The low frequency behavior…
We study the velocity dependence of the frictional force of the tip of an atomic force microscope as it is dragged across a surface, taking into account memory effects and thermal fluctuations. Memory effects are described by a coupling of…
The ongoing development of single electron, nano and atomic scale semiconductor devices would benefit greatly from a characterization tool capable of detecting single electron charging events with high spatial resolution, at low…
Molecular dynamics simulations have been performed to understand true atomic resolution, which has been observed on the Si(111)-7$\times$7 surface by dynamic force microscopy in ultra high vacuum(UHV). Stable atomic-scale contrast is…
Atomic force microscopes (AFMs) are ubiquitous in research laboratories and have recently been priced for use in teaching laboratories. Here we review several AFM platforms (Dimension 3000 by Digital Instruments, EasyScan2 by Nanosurf,…
Using a magnetic resonance force microscope (MRFM), the power emitted by a spin transfer nano-oscillator consisting of a normally magnetized Py$|$Cu$|$Py circular nanopillar is measured both in the autonomous and forced regimes. From the…
Force-distance curve experiments are commonly performed in Atomic Force Microscopy (AFM) to obtain the viscoelastic characteristics of materials, such as the storage and loss moduli or compliances. The classic methods used to obtain these…
We demonstrate the application of Atomic Force Microscopy (AFM) based optical force microscopy to map the optical near-fields with nanometer resolution, limited only by the AFM probe geometry. We map the electric field distributions of…
We suggest simple model of image formation in atomic force microscope (AFM) taking into account contact deformations of probe and sample during scanning. The model explains the possibility of AFM visualization of regular atomic or molecular…