Related papers: High On/Off Ratio Graphene Nanoconstriction Field …

We report the batch fabrication of graphene field-effect-transistors (GFETs) with nanoperforated graphene as channel. The transistors were cut and encapsulated. The encapsulated GFETs display saturation regions that can be tuned by…

Large scale graphene electronics desires lithographic patterning of narrow graphene nanoribbons (GNRs) for device integration. However, conventional lithography can only reliably pattern ~20nm wide GNR arrays limited by lithography…

We report the realization of top-gated graphene nanoribbon field effect transistors (GNRFETs) of ~10 nm width on large-area epitaxial graphene exhibiting the opening of a band gap of ~0.14 eV. Contrary to prior observations of disordered…

Graphene is considered to be a promising candidate for future nano-electronics due to its exceptional electronic properties. Unfortunately, the graphene field-effect-transistors (FETs) cannot be turned off effectively due to the absence of…

Nanofabrication research pursues the miniaturization of patterned feature size. In the current state of the art, micron scale areas can be patterned with features down to ~ 30 nm pitch using electron beam lithography. Our work demonstrates…

A novel nanoelectronic device is constructed by graphyne that is robustly connected between graphene electrodes, where graphyne is composed of hexagonal carbon rings and carbon chains. Owing to similarities between the bond lengths and unit…

Graphene nanoribbon (GNR) field-effect transistors (FETs) with widths down to 12 nm have been fabricated by electron beam lithography using a wafer-scale chemical vapor deposition (CVD) process to form the graphene. The GNR FETs show…

This work evaluates the performance of carbon nanotube field effect transistors (CNTFET) using few layer graphene as the contact electrode material. We present the experimental results obtained on the barrier height at CNT graphene junction…

The performance of graphene-based transistors is often limited by the large electrical resistance across the metal-graphene contact. We report an approach to achieve ultra-low resistance metal contacts to graphene transistors. Through a…

We propose an analytical device model for a graphene nanoribbon field-effect transistor (GNR-FET). The GNR-FET under consideration is based on a heterostructure which consists of an array of nanoribbons clad between the highly conducting…

In this work, we demonstrate a silicon nanocrystal Field Effect Transistor (ncFET). Its operation is similar to that of a Tunnelling Field Effect Transistor (TFET) with two barriers in series. The tunnelling barriers are fabricated in very…

Three types of first generation epitaxial graphene field effect transistors (FET) are presented and their relative merits are discussed. Graphene is epitaxially grown on both the carbon and silicon faces of hexagonal silicon carbide and…

Sub-10nm wide graphene nanoribbon field-effect transistors (GNRFETs) are studied systematically. All sub-10nm GNRs afforded semiconducting FETs without exception, with Ion/Ioff ratio up to 10^6 and on-state current density as high as…

Recent experiments shown that graphene epitaxially grown on Silicon Carbide (SiC) can exhibit a energy gap of 0.26 eV, making it a promising material for electronics. With an accurate model, we explore the design parameter space for a fully…

In view of the appreciable semiconducting gap of 0.26 eV observed in recent experiments, epitaxial graphene on a SiC substrate seems a promising channel material for FETs. Indeed, it is two-dimensional - and therefore does not require…

We have fabricated suspended few layer (1-3 layers) graphene nanoribbon field effect transistors from unzipped multiwall carbon nanotubes. Electrical transport measurements show that current-annealing effectively removes the impurities on…

By means of numerical simulation, we study in this work the effects of uniaxial strain on transport properties of strained graphene heterojunctions and explore the possibility to achieve good performance of graphene transistors using these…

Bottom-up synthesized GNRs and GNR heterostructures have promising electronic properties for high performance field effect transistors (FETs) and ultra-low power devices such as tunnelling FETs. However, the short length and wide band gap…

One of the ways to use graphene in field effect transistors is to introduce a band gap by quantum confinement effect [1]. That is why narrow graphene nanoribbons (GNRs) with width less than 50nm are considered to be essential components in…

With decreasing device dimensions, the performance of carbon nanotube field-effect transistors (CNFETs) is limited by high Off currents except at low drain voltages. We show that an asymmetric design improves the performance, reducing Off…