相关论文: Distributed Can-Bus Based Beam Diagnostic System f…
Based on requirements of modern vehicle, in- vehicle Controller Area Network (CAN) architecture has been implemented. In order to reduce point to point wiring harness in vehicle automation, CAN is suggested as a means for data communication…
Diffuse Reflectance Spectroscopy (DRS) is a well-established optical technique for tissue composition assessment which has been clinically evaluated for tumour detection to ensure the complete removal of cancerous tissue. While point-wise…
In ultrasound (US) imaging, individual channel RF measurements are back-propagated and accumulated to form an image after applying specific delays. While this time reversal is usually implemented using a hardware- or software-based…
A set of power supplies (PS) with output power rated from 100 W up to 10 kW for electromagnets powering was developed. These PS have range of current tuning of 60-80 db with high accuracy (error should be less than 0,01%). Some types of…
An extensible power supply control and monitoring system has been developed at Fermilab's Technical Division as a result of requirements to control and monior power supplies of various types from within many different applications. This…
The Attitude Determination and Control System is one of the critical boards of any satellite, specially the micro-satellites. The ADCS is the bridge linking sensors data to actuators by several computationally complex algorithms such as…
Reliable systems require effective monitoring techniques for fault identification. System-level diagnosis was originally proposed in the 1960s as a test-based approach to monitor and identify faulty components of a general system. Over the…
Channel estimation is a central bottleneck in BD-RIS-assisted MIMO systems. The richer inter-element coupling that enables large performance gains also makes training and hardware control substantially harder than in diagonal RIS…
Deep unfolding network (DUN) that unfolds the optimization algorithm into a deep neural network has achieved great success in compressive sensing (CS) due to its good interpretability and high performance. Each stage in DUN corresponds to…
When it comes to in-vehicle networks (IVNs), the controller area network -- CAN -- bus dominates the market; automobiles manufactured and sold around the world depend on the CAN bus for safety-critical communications between various…
A distributed massive MIMO channel sounder for acquiring large CSI datasets, dubbed DICHASUS, is presented. The measured data has potential applications in the study of various machine learning algorithms for user localization, JCAS,…
Diffuse correlation spectroscopy (DCS) is a powerful tool for assessing microvascular hemodynamic in deep tissues. Recent advances in sensors, lasers, and deep learning have further boosted the development of new DCS methods. However,…
Radiation measurement relies on pulse detection, which can be performed using various configurations of high-speed analog-to-digital converters (ADCs) and field-programmable gate arrays (FPGAs). For optimal power consumption, design…
The optical spectrum of a quantum system is jointly determined by the properties of the emitter and the driving field. All-optical spectral control can hence be a promising method to engineer the properties of single photon emitters for…
Software systems for safety-critical systems like self-driving cars (SDCs) need to be tested rigorously. Especially electronic control units (ECUs) of SDCs should be tested with realistic input data. In this context, a communication…
The proposed delta-sigma modulator ($\Delta\Sigma$M) based signal acquisition architecture uses a differential difference amplifier (DDA) customized for dual purpose roles, namely as instrumentation amplifier and as integrator of…
We have developed a completely new type of general-purpose CCD data acquisition system which enables one to drive any type of CCD using any type of clocking mode. A CCD driver system widely used before consisted of an analog multiplexer…
The advent of microcontrollers with enough CPU power and with analog and digital peripherals makes possible to design a complete particle detector with relative acquisition system around one microcontroller chip. The existence of a world…
Ground fault detection in inverter-based microgrid (IBM) systems is challenging, particularly in a real-time setting, as the fault current deviates slightly from the nominal value. This difficulty is reinforced when there are partially…
This paper presents a model predictive control (MPC)-based online real-time adaptive control scheme for emergency voltage control in power systems. Despite tremendous success in various applications, real-time implementation of MPC for…