相关论文: Reynolds number dependence of drag reduction by ro…
A simple model of the effect of polymer concentration on the amount of drag reduction in turbulence is presented, simulated and analyzed. The qualitative phase diagram of drag coefficient vs. Reynolds number (Re) is recaptured in this…
We address the mechanism of drag reduction by polymers in turbulent wall bounded flows. On the basis of the equations of fluid mechanics we present a quantitative derivation of the "maximum drag reduction (MDR) asymptote" which is the…
We present an experimental study on the drag reduction by polymers in Taylor-Couette turbulence at Reynolds numbers ($Re$) ranging from $4\times 10^3$ to $2.5\times 10^4$. In this $Re$ regime, the Taylor vortex is present and accounts for…
We investigate the phenomenon of drag reduction in a viscoelastic fluid model of dilute polymer solutions. By means of direct numerical simulations of the three-dimensional turbulent Kolmogorov flow we show that drag reduction takes place…
The drag of turbulent flows can be drastically decreased by addition of small amounts of high molecular weight polymers. While drag reduction initially increases with polymer concentration, it eventually saturates to what is known as the…
Drag reduction by polymers in turbulent flows raises an apparent contradiction: the stretching of the polymers must increase the viscosity, so why is the drag reduced? A recent theory proposed that drag reduction in agreement with…
Drag reduction by polymers in turbulent wall-bounded flows exhibits universal and non-universal aspects. The universal maximal mean velocity profile was explained in a recent theory. The saturation of this profile and the crossover back to…
The flow of fluids in channels, pipes or ducts, as in any other wall-bounded flow (like water along the hulls of ships or air on airplanes) is hindered by a drag, which increases many-folds when the fluid flow turns from laminar to…
We investigate high-Reynolds number turbulence in dilute polymer solutions. We show the existence of a critical value of the Reynolds number which separates two different regimes. In the first regime, below the transition, the influence of…
We address the "Additive Equivalence" discovered by Virk and coworkers: drag reduction affected by flexible and rigid rodlike polymers added to turbulent wall-bounded flows is limited from above by a very similar Maximum Drag Reduction…
Numerical simulations of turbulent channel flows, with or without additives, are limited in the extent of the Reynolds number \Re and Deborah number \De. The comparison of such simulations to theories of drag reduction, which are usually…
We study the dynamics of a dilute solution of rigid rodlike polymers in a viscous fluid at low Reynolds number by means of numerical simulations of a simple rheological model. We show that the rotational dynamics of polymers destabilizes…
Polymer-induced drag reduction is bounded by an asymptotic limit of maximum drag reduction (MDR). For decades, researchers have presumed that MDR reflects the convergence to an ultimate flow state that is not further changed by polymers.…
Drag reduction by polymers is bounded between two universal asymptotes, the von-K\'arm\'an log-law of the law and the Maximum Drag Reduction (MDR) asymptote. It is theoretically understood why the MDR asymptote is universal, independent of…
This paper examines how increasing the value of the Reynolds number $Re$ affects the ability of spanwise-forcing techniques to yield turbulent skin-friction drag reduction. The considered forcing is based on the streamwise-travelling waves…
Direct numerical simulations of turbulent pipe flow with transverse wall oscillation (WWO) and with no transverse wall oscillation (NWO) are carried out at friction Reynolds numbers Re{\tau} = 170, 360, and 720. The period and amplitude of…
The phenomenon of drag reduction by polymer additives had been studied in simulations on the basis of non-Newtonian fluid mechanical models that take into account the field of polymer extension (conformation tensor) and its interaction with…
Polymer additives can substantially reduce the drag of turbulent flows and the upper limit, the so called "maximum drag reduction" (MDR) asymptote is universal, i.e. independent of the type of polymer and solvent used. Until recently, the…
Drag reduction by polymers in wall turbulence is bounded from above by a universal maximal drag reduction (MDR) velocity profile that is a log-law, estimated experimentally by Virk as $V^+(y^+)\approx 11.7 \log y^+ -17$. Here $V^+(y)$ and…
Direct numerical simulations (DNS) of rotating pipe flows up to $Re_{\tau} \approx 3000$ are carried out to investigate drag reduction effects associated with axial rotation, extending previous studies carried out at a modest Reynolds…