相关论文: Room temperature GW bar detector with opto-mechani…
A gravitational resonant bar detector with a large scale Fabry-Perot cavity as an optical read out and a mechanical displacement transformer is considered. We calculate, in a fully analytical way, the final receiver bandwidth in which the…
The next generation of gravitational wave (gw) detectors is expected to fully enter into the quantum regime of force and displacement detection. With this aim, it is important to scale up the experiments on opto-mechanical effects from the…
Preliminary results from an optical-fiber gravitational wave interferometric detector are reported. The detector is very small, cheap and simple to build and operate. It is assembled from readily available opto-electronic components. A…
With the planning of new ambitious gravitational wave (GW) observatories, fully controlled laboratory experiments on dynamic gravitation become more and more important. Such new experiments can provide new insights in potential dynamic…
Current gravitational-wave (GW) detectors are limited in the amount of circulating power they can reach. Optical absorption in the test masses leads to thermal effects that shift the eigenmodes of the optical cavities, and cause control…
The thermal fluctuation of mirror surfaces is the fundamental limitation for interferometric gravitational wave (GW) detectors. Here, we experimentally demonstrate for the first time a reduction in a mirror's thermal fluctuation in a GW…
This chapter is concerned with the question: how do gravitational waves (GWs) interact with their detectors? It is intended to be a theory review of the fundamental concepts involved in interferometric and acoustic (Weber bar) GW antennas.…
Enhancing of sensitivity of the opto-acoustical gravitational wave (GW) antenna OGRAN installed in the underground facilities of Baksan Neutrino Observatory is analyzed. Calculations are presented showing a sensitivity improving on two…
A folded resonant Fabry-Perot cavity has the potential to significantly reduce the impact of coating thermal noise on the performance of kilometer scale gravitational wave detectors. When constructed using only spherical mirror surfaces it…
A derivation of the optical axis lenght fluctations due by tilts of the mirrors of the Fabry-Perot cavity of long-baseline interferometers for the detection of gravitational waves in presence of the gravitational field of the earth is…
Optically levitated sensors inside a Fabry-P\'erot cavity have been proposed for high-frequency gravitational-wave (GW) detection, though their configuration for gravitational wave sensitivity exhibits counterintuitive features. We provide…
In the previous paper, we introduced a new method of gravitational waves (GW) detection. In our proposal, we replaced usual Weber's metallic bar with a cold electronic plasma. We obtained a nonhomogenous differential equation for tangential…
We study the sensitivity limits of a broadband gravitational-waves detector based on dual resonators such as nested spheres. We determine both the thermal and back-action noises when the resonators displacements are read-out with an…
For gravitational-wave interferometric detectors, there is a tradeoff between the detector bandwidth and peak sensitivity when focusing on the shot noise level. This has to do with the frequency-dependent propagation phase lag (positive…
We have developed a new gravitaional-wave (GW) detector, TOrsion-Bar Antenna (TOBA), with multiple-output configuration. TOBA is a detector with bar-shaped test masses that rotate by the tidal force of the GWs. In our detector, three…
A key issue in developing pendular Fabry-Perot interferometers as very accurate displacement measurement devices, is the noise level. The Fabry-Perot pendulums are the most promising device to detect gravitational waves, and therefore the…
Tiny vibrations of mechanical structures are the main limiting cause in a number of high sensitivity measurement apparatus, chief among them the most sensitive displacement apparatus on earth: gravitational wave interferometers. Such…
The gravitational wave detector of higher sensitivity and greater bandwidth in kilohertz window is required for future gravitational wave astronomy and cosmology. Here we present a new type broadband high frequency laser interferometer…
Cavity optomechanics has opened new avenues of research in both fundamental physics and precision measurement by significantly advancing the sensitivity achievable in detecting attonewton forces, nanoparticles, magnetic fields, and…
We describe an atom interferometric gravitational wave detector design that can operate in a resonant mode for increased sensitivity. By oscillating the positions of the atomic wavepackets, this resonant detection mode allows for coherently…