相关论文: Lanthanum-Cerium Based Bulk Metallic Glasses with …
The glass-formation range of bulk metallic glasses (BMGs) based on lanthanum and cerium was pinpointed in La-Al-Co, Ce-Al-Co and pseudo-ternary (La-Ce)-Al-Co system respectively by copper mold casting. Through the stepwise substitution of…
The critical cooling rate $\mathcal{R}_c$, below which liquids crystallize upon cooling, characterizes the glass-forming ability (GFA) of the system. While pure metals are typically poor glass formers with $\mathcal {R}_c>10^{12}\, {\rm…
Understanding the formation of bulk metallic glasses (BMG) in metallic systems and finding a reliable criterion for selection of BMG compositions are among the most important issues in condensed matter physics and material science. Using…
Bulk metallic glass forms when liquid metal alloys solidify without crystalization. In the search for Iron-based bulk glass-forming alloys of the metal-metalloid type (Fe-B- and Fe-C-based), crystals based on the structural prototype C6Cr23…
In the present investigation the glass forming ability of Ce65Al25Co10 metallic glass has been reported. It was successfully synthesised using melt spinning techniques. The existence of amorphous phase in Ce65Al25Co10 alloy have been proved…
The glass-forming ability (GFA) of alloys, colloidal dispersions, and other particulate materials, as measured by the critical cooling rate $R_c$, can span more than ten orders of magnitude. Even after numerous previous studies, the…
Metallic glasses are excellent candidates for biomedical implant applications due to their inherent strength and corrosion resistance. Use of metallic glasses in structural applications is limited, however, because bulk dimensions are…
When a liquid is cooled well below its melting temperature at a rate that exceeds the critical cooling rate $R_c$, the crystalline state is bypassed and an amorphous glassy state forms instead. $R_c$ (or the corresponding critical casting…
A correlation between the change in magnetic susceptibility ({\Delta}\c{hi}exp) upon crystallization of Cu-Zr, Hf metallic glasses (MG) with their glass forming ability (GFA) observed recently is found to apply to Cu-Ti and Zr-Ni alloys,…
Bulk metallic glasses (BMGs) are amorphous alloys with desirable mechanical properties and processing capabilities. To date, the design of new BMGs has largely employed empirical rules and trial-and-error experimental approaches. Ab initio…
As a promising remedy for overcoming the limited ductility and work softening of bulk metallic glasses (BMGs), BMG composites incorporating a B2 crystalline phase have attracted considerable attention. Here, we explore the formation of…
We perform molecular dynamics simulations to compress binary hard spheres into jammed packings as a function of the compression rate $R$, size ratio $\alpha$, and number fraction $x_S$ of small particles to determine the connection between…
Ferromagnetic bulk amorphous Fe40Ni40P14B6 alloy rods with a diameter of 1.2 mm can be prepared by means of a rapid quenching technique. If a fluxing technique is also used, amorphous rods with a diameter as large as 2.5 mm can be…
Bulk metallic glasses (BMGs) are produced by rapidly thermally quenching supercooled liquid metal alloys below the glass transition temperature at rates much faster than the critical cooling rate R_c below which crystallization occurs. The…
Prediction of the glass forming ability (GFA) of alloys remains a major challenge. We are not able to predict the composition dependence of the GFA of even binary alloys. To investigate the effect of each element's propensity to form…
The elastic properties of the Zr$_{50}$Cu$_{40}$Ag$_{10}$ metallic alloy, such as the bulk modulus $B$, the shear modulus $G$, the Young's modulus $E$ and the Poisson's ratio $\sigma$, are investigated by molecular dynamics simulation in…
A new amorphous alloy system $(TiZrNbCu)_{1-x}Co_x$ covering a broad composition range from the high-entropy (HEA) to Co rich alloys (x$\leqslant$ 0.43) has been fabricated, characterized and investigated. A comprehensive study of the…
During the solidification of Al-Sm metallic glasses the evolution of the supercooled liquid atomic structure has been identified with an increasing population of icosahedral-like clusters with increasing Sm concentration. These clusters…
We calculate the cohesive energies of Fe-based glass-forming alloys in the B-Fe-Y-Zr quaternary system. Our {\it ab-initio} calculations fully relax atomic positions and lattice parameters yielding enthalpies of mixing at T=0K. We examine…
Three liquid crystalline equimolar mixtures are formulated, each containing the MHPOBC compound and the homolog from the 3FmHPhF6 series with m = 4, 5, and 6. The properties of the mixtures are investigated by differential scanning…