相关论文: Portevin-Le Chatelier Effect: a Poisson Process

The influence of technological parameters of pulsed-DC chemical vapour deposition on the deposition rate, the mechanical properties and the residual stress of diamond-like carbon (DLC) coatings deposited onto a martensitic steel substrate,…

Aluminum nitride is piezoelectric and exhibits spontaneous polarization along the $c$-axis, but the polarization cannot be switched by applying an electric field. Adding Sc to AlN enhances the piezoelectric properties, and can make the…

A theory of the Post-Collision Interaction (PCI) is developed for the case when an electron atom impact results in creation of two low-energy Wannier electrons and an ion excited into an autoionizing state. The following autoionization…

It is well-known that at the high Reynolds number, the linearized Navier-Stokes equations around the inviscid stable shear profile admit growing mode solutions due to the destabilizing effect of the viscosity. This phenomenon, called…

The photonic density of states (PDS) of eigen polarizations (EPs) in cholesteric liquid crystal (CLC) cells with a defect layer inside are calculated. The dependences for the PDS and light intensity in the defect layer on the parameters…

In this letter, we study the effects of weak off-diagonal disorder on conjugated polymers with a doubly degenerate ground-state. We find that disorder induces a finite density of neutral solitons in the lattice dimerization of a polymer…

Charged colloidal dispersions make up the basis of a broad range of industrial and commercial products, from paints to coatings and additives in cosmetics. During drying, an initially liquid dispersion of such particles is slowly…

Stretching an elastic material along one axis typically induces contraction along the transverse axes, a phenomenon known as the Poisson effect. From these strains, one can compute the specific volume, which generally either increases or,…

Origami metamaterials are known to display highly tunable Poisson's ratio values depending on their folded state. Most studies on the Poisson effects in deployable origami tessellations are restricted to theory and simulation. Experimental…

Finite Element simulations of rubbers and biological soft tissue usually assume that the material being deformed is slightly compressible. It is shown here that in shearing deformations the corresponding normal stress distribution can…

2D conjugated polyphthalocyanines can be obtained as two distinctly different types of material with specific molecular structures and different morphological properties. It was believed that the temperature is the key factor affecting the…

Tensile stress relaxation is combined with transmission electron microscopy to reveal dramatic changes in dislocation structure and sub structure in pure alpha iron as a result of the effects of dissolved hydrogen. We find that hydrogen…

We study measures on random partitions, arising from condensing stochastic particle systems with stationary product distributions. We provide fairly general conditions on the stationary weights, which lead to Poisson-Dirichlet statistics of…

Pressure-induced phase transformations (PTs) between numerous phases of Si, the most important electronic material, have been studied for decades. This is not the case for plastic strain-induced PTs. Here, we revealed in-situ various…

The creation of polarized electron-positron pairs by the nonlinear Breit-Wheeler process in short laser pulses is investigated using the Baier-Katkov semiclassical method beyond local-constant-field approximation (LCFA), which allows for…

Materials with negative Poisson ratio have the counter-intuitive property of expanding laterally when they are stretched longitudinally. They are accordingly termed auxetic, from the Greek auxesis meaning to increase. Experimental studies…

It is shown here that fracture after a brief plastic strain, typically of a few percents, is a necessary consequence of the polycrystalline nature of the materials. The polycrystal undergoing plastic deformation is modeled as a flowing…

Plastic flow behavior of low carbon steel has been studied at room temperature during tensile deformation by varying the initial strain rate of 3.3x10e-4 1/sec to the final strain rate ranging from 1.33x10e-3 1/sec to 2.0x10e-3 1/sec at a…

Polymers exposed to ultrashort pulsed lasers (UPL) experience a range of physical and chemical changes that play a key role in applications ranging from material processing to advanced photonics, and biomedicine. To elucidate the…

The microbunching instability usually exists in the LINAC of a free electron laser (FEL) facility. In many cases, the longitudinal space charge (LSC) is a dominant factor that generates the instability. For the highly bright electron beams,…